Quantcast
Channel: Ubuntu Forums - Networking & Wireless
Viewing all 23300 articles
Browse latest View live
↧

[ubuntu] Advice Requested - Adding Wireless to a wired network

May 21, 2016, 9:28 am
$
0
0
Hello Everyone,

I could use some advice - I have DSL coming in to a wired network - typical 5 port router. I would like to add wireless capability, but it is not something that would be in use at all times. Mainly just for use with smart-phone, and perhaps a laptop in the future. Switching to wireless for everything is not an option. I would just like to add the capability for use now and again.

I have read a little about portable wireless for travellers, but I'm really not sure if that is the best option.

Please let me know if you have a similar set-up, and offer suggestions as you see fit.

Thanks in advance!
↧
Search

ubuntu 16.04 LTS - Server not found

May 21, 2016, 10:53 am
$
0
0
I had this problem one week ago and i couldnt solve it,
so i reinstalled ubuntu 16.04 being wired connected to be sure that it was fully updated,
once installed i removed the ethernet cable and the wireless connection worked,
since then i was happy, i started by installing some apps that i need to work and customizing folders, colors, etc by downloading some files from internet,
Until this morning, i turned on my laptop and the problem came back

Browser that i have
Firefox - Server not found
Ubuntu browser - Server not found

Note:
Windows-Ubuntu dual boot
Wireless connection in Windows working properly

Files i installed after being wireless connected - before i lost my connection again:
Scilab
Unity tweak tools
change folder color
geogebra
Vlc player
nemo file manager

Why does this issue happen?
↧
↧

QCA6164 in Ubuntu 16.04, 5GHz issue

May 21, 2016, 1:07 pm
$
0
0
Hi
I have some issues too, my 2,4GHz works just fine, and I can see both my 5GHz bands but they won't accept the password. So I can't connect to them.

Not sure if it has anything to do with the diffrence in 5GHz bands between Sweden and Kvalos firmware.
Anyway here is my wireless scrip

Code:

########## wireless info START ##########

Report from: 21 May 2016 22:01 CEST +0200

Booted last: 21 May 2016 00:00 CEST +0200

Script from: 27 Sep 2015 00:34 UTC +0000

##### release ###########################

Distributor ID:    Ubuntu
Description:    Ubuntu 16.04 LTS
Release:    16.04
Codename:    xenial

##### kernel ############################

Linux 4.6.0-040600rc7-generic #201605120803 SMP Thu May 12 12:04:59 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=7

##### desktop ###########################

Ubuntu

##### lspci #############################

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
    Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [17aa:382e]
    Kernel driver in use: r8169

02:00.0 Network controller [0280]: Qualcomm Atheros QCA6164 802.11ac Wireless Network Adapter [168c:0041] (rev 20)
    Subsystem: Lenovo QCA6164 802.11ac Wireless Network Adapter [17aa:3545]
    Kernel driver in use: ath10k_pci

##### lsusb #############################

Bus 001 Device 004: ID 174f:14ee Syntek
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 0cf3:e300 Atheros Communications, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: ideapad_wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
1: ideapad_bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
2: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
3: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

##### lsmod #############################

ath10k_pci            45056  0
ath10k_core          323584  1 ath10k_pci
ath                    32768  1 ath10k_core
mac80211              745472  1 ath10k_core
cfg80211              581632  3 ath,mac80211,ath10k_core
ideapad_laptop        24576  0
sparse_keymap          16384  1 ideapad_laptop
wmi                    20480  1 ideapad_laptop
video                  40960  1 ideapad_laptop

##### interfaces ########################

auto lo
iface lo inet loopback

##### ifconfig ##########################

enp1s0    Link encap:Ethernet  HWaddr <MAC 'enp1s0' [IF]> 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlp2s0    Link encap:Ethernet  HWaddr <MAC 'wlp2s0' [IF]> 
          inet addr:192.168.0.179  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::5cd5:ae7d:d77:c32f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3426 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2949 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1458000 (1.4 MB)  TX bytes:455312 (455.3 KB)

##### iwconfig ##########################

lo        no wireless extensions.

enp1s0    no wireless extensions.

wlp2s0    IEEE 802.11abgn  ESSID:"Airfilter G/N 2.4GHz" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: <MAC 'Airfilter G/N 2.4GHz' [AC1]> 
          Bit Rate=1 Mb/s  Tx-Power=20 dBm 
          Retry short limit:7  RTS thr:off  Fragment thr:off
          Power Management:on
          Link Quality=61/70  Signal level=-49 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:72  Missed beacon:0

##### route #############################

Kernel IP routing table
Destination    Gateway        Genmask        Flags Metric Ref    Use Iface
0.0.0.0        192.168.0.1    0.0.0.0        UG    600    0        0 wlp2s0
169.254.0.0    0.0.0.0        255.255.0.0    U    1000  0        0 wlp2s0
192.168.0.0    0.0.0.0        255.255.255.0  U    600    0        0 wlp2s0

##### resolv.conf #######################

nameserver 127.0.1.1
search bahnhof.se

##### network managers ##################

Installed:

    NetworkManager

Running:

root      2327    1  0 21:45 ?        00:00:02 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                        wlp2s0
GENERAL.TYPE:                          wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                        Qualcomm Atheros
GENERAL.PRODUCT:                        QCA6164 802.11ac Wireless Network Adapter
GENERAL.DRIVER:                        ath10k_pci
GENERAL.DRIVER-VERSION:                4.6.0-040600rc7-generic
GENERAL.FIRMWARE-VERSION:              atheros-12.0.0.102-fw
GENERAL.HWADDR:                        <MAC 'wlp2s0' [IF]>
GENERAL.MTU:                            0
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                        0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:02.4/0000:02:00.0/net/wlp2s0
GENERAL.IP-IFACE:                      wlp2s0
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    Airfilter G/N 2.4GHz
GENERAL.CON-UUID:                      036877a5-0c6c-416f-afd8-b11669386054
GENERAL.CON-PATH:                      /org/freedesktop/NetworkManager/ActiveConnection/2
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                    1 Mb/s
CAPABILITIES.IS-SOFTWARE:              no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                  yes
WIFI-PROPERTIES.TKIP:                  yes
WIFI-PROPERTIES.CCMP:                  yes
WIFI-PROPERTIES.AP:                    yes
WIFI-PROPERTIES.ADHOC:                  yes
WIFI-PROPERTIES.2GHZ:                  yes
WIFI-PROPERTIES.5GHZ:                  yes
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3,1,0}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:  3f5aa970-d4bf-42cd-9015-8072d096e2d8 | Airfilter AC/N 5GHz
CONNECTIONS.AVAILABLE-CONNECTIONS[2]:  3673d872-0e05-4413-9452-d7323cc4ca95 | Airfilter AC/N
CONNECTIONS.AVAILABLE-CONNECTIONS[3]:  036877a5-0c6c-416f-afd8-b11669386054 | Airfilter G/N 2.4GHz
IP4.ADDRESS[1]:                        192.168.0.179/24
IP4.GATEWAY:                            192.168.0.1
IP4.ROUTE[1]:                          dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                            192.168.0.1
IP4.DOMAIN[1]:                          bahnhof.se
DHCP4.OPTION[1]:                        requested_routers = 1
DHCP4.OPTION[2]:                        requested_domain_search = 1
DHCP4.OPTION[3]:                        requested_time_offset = 1
DHCP4.OPTION[4]:                        requested_domain_name = 1
DHCP4.OPTION[5]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]:                        requested_broadcast_address = 1
DHCP4.OPTION[7]:                        requested_netbios_scope = 1
DHCP4.OPTION[8]:                        requested_wpad = 1
DHCP4.OPTION[9]:                        next_server = 0.0.0.0
DHCP4.OPTION[10]:                      expiry = 1464464800
DHCP4.OPTION[11]:                      requested_interface_mtu = 1
DHCP4.OPTION[12]:                      requested_subnet_mask = 1
DHCP4.OPTION[13]:                      routers = 192.168.0.1
DHCP4.OPTION[14]:                      dhcp_message_type = 5
DHCP4.OPTION[15]:                      ip_address = 192.168.0.179
DHCP4.OPTION[16]:                      requested_static_routes = 1
DHCP4.OPTION[17]:                      domain_name = bahnhof.se
DHCP4.OPTION[18]:                      requested_domain_name_servers = 1
DHCP4.OPTION[19]:                      broadcast_address = 192.168.0.255
DHCP4.OPTION[20]:                      requested_ntp_servers = 1
DHCP4.OPTION[21]:                      requested_netbios_name_servers = 1
DHCP4.OPTION[22]:                      dhcp_lease_time = 604800
DHCP4.OPTION[23]:                      domain_name_servers = 192.168.0.1
DHCP4.OPTION[24]:                      requested_ms_classless_static_routes = 1
DHCP4.OPTION[25]:                      subnet_mask = 255.255.255.0
DHCP4.OPTION[26]:                      network_number = 192.168.0.0
DHCP4.OPTION[27]:                      requested_host_name = 1
DHCP4.OPTION[28]:                      dhcp_server_identifier = 192.168.0.1
IP6.ADDRESS[1]:                        fe80::5cd5:ae7d:d77:c32f/64
IP6.GATEWAY:                           

GENERAL.DEVICE:                        enp1s0
GENERAL.TYPE:                          ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                        Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT:                        RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
GENERAL.DRIVER:                        r8169
GENERAL.DRIVER-VERSION:                2.3LK-NAPI
GENERAL.FIRMWARE-VERSION:              rtl8168h-2_0.0.2 02/26/15
GENERAL.HWADDR:                        <MAC 'enp1s0' [IF]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                        2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:02.3/0000:01:00.0/net/enp1s0
GENERAL.IP-IFACE:                     
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    --
GENERAL.CON-UUID:                      --
GENERAL.CON-PATH:                      --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                    unknown
CAPABILITIES.IS-SOFTWARE:              no
WIRED-PROPERTIES.CARRIER:              off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:

SSID                  BSSID              MODE  CHAN  FREQ      RATE      SIGNAL  BARS  SECURITY  ACTIVE  *
--                    <MAC '' [AC2]>  Infra  11    2462 MHz  54 Mbit/s  100    ▂▄▆█  --        no       
Airfilter AC/N        <MAC 'Airfilter AC/N' [AC5]>  Infra  100  5500 MHz  54 Mbit/s  87      ▂▄▆█  WPA1 WPA2  no       
Airfilter AC/N 5GHz  <MAC 'Airfilter AC/N 5GHz' [AC4]>  Infra  52    5260 MHz  54 Mbit/s  85      ▂▄▆█  WPA1 WPA2  no       
Airfilter G/N 2.4GHz  <MAC 'Airfilter G/N 2.4GHz' [AC1]>  Infra  11    2462 MHz  54 Mbit/s  71      ▂▄▆_  WPA1 WPA2  yes    *
TN_24GHz_EDAA43      <MAC 'TN_24GHz_EDAA43' [AC3]>  Infra  11    2462 MHz  54 Mbit/s  44      ▂▄__  WPA1 WPA2  no       

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/Airfilter AC*N 5GHz]] (600 root)

[[/etc/NetworkManager/system-connections/EmmothS6Edge]] (600 root)
[connection] id=EmmothS6Edge | type=wifi | permissions=user:etecs:;
[wifi] mac-address=<MAC 'wlp2s0' [IF]> | mac-address-blacklist= | ssid=EmmothS6Edge
[ipv4] method=auto
[ipv6] method=auto

[[/etc/NetworkManager/system-connections/Airfilter G*N 2.4GHz]] (600 root)

[[/etc/NetworkManager/system-connections/Airfilter AC*N]] (600 root)

##### iw reg get ########################

Region: Europe/Stockholm (based on set time zone)

country SE: DFS-ETSI
    (2402 - 2482 @ 40), (N/A, 20), (N/A)
    (5170 - 5250 @ 80), (N/A, 20), (N/A)
    (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS
    (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS
    (57000 - 66000 @ 2160), (N/A, 40), (N/A)

##### iwlist channels ###################

lo        no frequency information.

enp1s0    no frequency information.

wlp2s0    32 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 100 : 5.5 GHz
          Channel 104 : 5.52 GHz
          Channel 108 : 5.54 GHz
          Channel 112 : 5.56 GHz
          Channel 116 : 5.58 GHz
          Channel 120 : 5.6 GHz
          Channel 124 : 5.62 GHz
          Channel 128 : 5.64 GHz
          Channel 132 : 5.66 GHz
          Channel 136 : 5.68 GHz
          Channel 140 : 5.7 GHz
          Current Frequency:2.462 GHz (Channel 11)

##### iwlist scan #######################

lo        Interface doesn't support scanning.

enp1s0    Interface doesn't support scanning.

Channel occupancy:

      3  APs on  Frequency:2.462 GHz (Channel 11)
      1  APs on  Frequency:5.26 GHz (Channel 52)
      1  APs on  Frequency:5.5 GHz (Channel 100)

wlp2s0    Scan completed :
          Cell 01 - Address: <MAC 'Airfilter G/N 2.4GHz' [AC1]>
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=60/70  Signal level=-50 dBm 
                    Encryption key:on
                    ESSID:"Airfilter G/N 2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000032a172f28
                    Extra: Last beacon: 1728ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: <MAC '' [AC2]>
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=70/70  Signal level=-36 dBm 
                    Encryption key:off
                    ESSID:""
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000032a16d142
                    Extra: Last beacon: 4460ms ago
          Cell 03 - Address: <MAC 'TN_24GHz_EDAA43' [AC3]>
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=38/70  Signal level=-72 dBm 
                    Encryption key:on
                    ESSID:"TN_24GHz_EDAA43"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000059fa9cd79e
                    Extra: Last beacon: 4660ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
          Cell 04 - Address: <MAC 'Airfilter AC/N 5GHz' [AC4]>
                    Channel:52
                    Frequency:5.26 GHz (Channel 52)
                    Quality=62/70  Signal level=-48 dBm 
                    Encryption key:on
                    ESSID:"Airfilter AC/N 5GHz"
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000032a24e3ae
                    Extra: Last beacon: 3152ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 05 - Address: <MAC 'Airfilter AC/N' [AC5]>
                    Channel:100
                    Frequency:5.5 GHz (Channel 100)
                    Quality=59/70  Signal level=-51 dBm 
                    Encryption key:on
                    ESSID:"Airfilter AC/N"
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000032a32f3d8
                    Extra: Last beacon: 2208ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK

##### module infos ######################

[ath10k_pci]
filename:      /lib/modules/4.6.0-040600rc7-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
firmware:      ath10k/QCA9377/hw1.0/board.bin
firmware:      ath10k/QCA9377/hw1.0/firmware-5.bin
firmware:      ath10k/QCA6174/hw3.0/board-2.bin
firmware:      ath10k/QCA6174/hw3.0/board.bin
firmware:      ath10k/QCA6174/hw3.0/firmware-5.bin
firmware:      ath10k/QCA6174/hw3.0/firmware-4.bin
firmware:      ath10k/QCA6174/hw2.1/board-2.bin
firmware:      ath10k/QCA6174/hw2.1/board.bin
firmware:      ath10k/QCA6174/hw2.1/firmware-5.bin
firmware:      ath10k/QCA6174/hw2.1/firmware-4.bin
firmware:      ath10k/QCA988X/hw2.0/board-2.bin
firmware:      ath10k/QCA988X/hw2.0/board.bin
firmware:      ath10k/QCA988X/hw2.0/firmware-5.bin
firmware:      ath10k/QCA988X/hw2.0/firmware-4.bin
firmware:      ath10k/QCA988X/hw2.0/firmware-3.bin
firmware:      ath10k/QCA988X/hw2.0/firmware-2.bin
firmware:      ath10k/QCA988X/hw2.0/firmware.bin
license:        Dual BSD/GPL
description:    Driver support for Atheros QCA988X PCIe devices
author:        Qualcomm Atheros
srcversion:    BD2C668795CFC4DA8EE58E0
depends:        ath10k_core
intree:        Y
vermagic:      4.6.0-040600rc7-generic SMP mod_unload modversions
parm:          irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm:          reset_mode:0: auto, 1: warm only (default: 0) (uint)

[ath10k_core]
filename:      /lib/modules/4.6.0-040600rc7-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
license:        Dual BSD/GPL
description:    Core module for QCA988X PCIe devices.
author:        Qualcomm Atheros
srcversion:    0B2570EA10985724B7B6B5F
depends:        mac80211,cfg80211,ath
intree:        Y
vermagic:      4.6.0-040600rc7-generic SMP mod_unload modversions
parm:          debug_mask:Debugging mask (uint)
parm:          uart_print:Uart target debugging (bool)
parm:          skip_otp:Skip otp failure for calibration in testmode (bool)
parm:          cryptmode:Crypto mode: 0-hardware, 1-software (uint)
parm:          rawmode:Use raw 802.11 frame datapath (bool)

[ath]
filename:      /lib/modules/4.6.0-040600rc7-generic/kernel/drivers/net/wireless/ath/ath.ko
license:        Dual BSD/GPL
description:    Shared library for Atheros wireless LAN cards.
author:        Atheros Communications
srcversion:    3FCDBF7CE71CB8FB980D59D
depends:        cfg80211
intree:        Y
vermagic:      4.6.0-040600rc7-generic SMP mod_unload modversions

[mac80211]
filename:      /lib/modules/4.6.0-040600rc7-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:    0F85316D3D74DC638291862
depends:        cfg80211
intree:        Y
vermagic:      4.6.0-040600rc7-generic SMP mod_unload modversions
parm:          minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:          max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:          max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:          beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:          probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:          ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:      /lib/modules/4.6.0-040600rc7-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:        Johannes Berg
srcversion:    64D16DD2A026E169A36027A
depends:       
intree:        Y
vermagic:      4.6.0-040600rc7-generic SMP mod_unload modversions
parm:          ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:          cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[ath10k_pci]
irq_mode: 0
reset_mode: 0

[ath10k_core]
cryptmode: 0
debug_mask: 0
rawmode: N
skip_otp: Y
uart_print: N

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/ath10k_core.conf]
options ath10k_core skip_otp=Y

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en

##### rc.local ##########################

exit 0

##### pm-utils ##########################

##### udev rules ########################

grep: /etc/udev/rules.d/*net*.rules: No such file or directory

##### dmesg #############################

[  192.443843] ath10k_pci 0000:02:00.0: [48]: 0x800B49E9 0x0041A930 0x00422484 0x00005008
[  192.443845] ath10k_pci 0000:02:00.0: [52]: 0x809A6C5C 0x0041A9C0 0x0042942C 0x0042CB4C
[  192.443847] ath10k_pci 0000:02:00.0: [56]: 0x809A62B0 0x0041AA00 0x0041AA28 0x00427230
[  192.444104] ath10k_pci 0000:02:00.0: failed to poke peer <MAC 'Airfilter AC/N 5GHz' [AC4]> param for ps workaround on vdev 0: -108
[  192.444123] ath10k_pci 0000:02:00.0: failed to set 2g txpower 0: -108
[  192.444128] ath10k_pci 0000:02:00.0: failed to setup tx power 0: -108
[  192.444132] ath10k_pci 0000:02:00.0: failed to recalc tx power: -108
[  192.444140] ath10k_pci 0000:02:00.0: failed to set PS Mode 0 for vdev 0: -108
[  192.444144] ath10k_pci 0000:02:00.0: failed to setup powersave: -108
[  192.444149] ath10k_pci 0000:02:00.0: failed to setup ps on vdev 0: -108
[  192.444163] ath10k_pci 0000:02:00.0: device is wedged, will not restart
[  192.444178] ath10k_pci 0000:02:00.0: failed to set vdev wmm params on vdev 1: -108
[  200.937578] wlp2s0: deauthenticating from <MAC 'Airfilter AC/N 5GHz' [AC4]> by local choice (Reason: 3=DEAUTH_LEAVING)
[  200.937718] ath10k_warn: 3 callbacks suppressed
[  200.937733] ath10k_pci 0000:02:00.0: failed to delete peer <MAC 'Airfilter AC/N 5GHz' [AC4]> for vdev 0: -108
[  200.938423] ath10k_pci 0000:02:00.0: failed to recalculate rts/cts prot for vdev 0: -108
[  200.938429] ath10k_pci 0000:02:00.0: failed to set protection mode 0 on vdev 0: -108
[  200.938434] ath10k_pci 0000:02:00.0: failed to set erp slot for vdev 0: -108
[  200.938439] ath10k_pci 0000:02:00.0: failed to set preamble for vdev 0: -108
[  200.938444] ath10k_pci 0000:02:00.0: faield to down vdev 0: -108
[  200.938449] ath10k_pci 0000:02:00.0: failed to submit vdev param txbf 0x0: -108
[  200.938453] ath10k_pci 0000:02:00.0: failed to recalc txbf for vdev 0: -108
[  200.938459] ath10k_pci 0000:02:00.0: failed to set vdev wmm params on vdev 0: -108 (repeated 2 times)
[  206.041582] ath10k_warn: 9 callbacks suppressed
[  206.041601] ath10k_pci 0000:02:00.0: failed to start hw scan: -108 (repeated 24 times)
[  229.123494] ath10k_pci 0000:02:00.0: failed to delete WMI vdev 1: -108
[  229.124854] ath10k_pci 0000:02:00.0: failed to delete WMI vdev 0: -108
[  229.124864] ath10k_pci 0000:02:00.0: removing stale peer <MAC 'Airfilter AC/N 5GHz' [AC4]> from vdev_id 0
[  229.124945] ath10k_pci 0000:02:00.0: could not suspend target (-108)
[  234.722208] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready (repeated 2 times)
[  238.636775] wlp2s0: authenticate with <MAC 'Airfilter G/N 2.4GHz' [AC1]>
[  238.675499] wlp2s0: send auth to <MAC 'Airfilter G/N 2.4GHz' [AC1]> (try 1/3)
[  238.695361] wlp2s0: authenticated
[  238.697908] wlp2s0: associate with <MAC 'Airfilter G/N 2.4GHz' [AC1]> (try 1/3)
[  238.732147] wlp2s0: RX AssocResp from <MAC 'Airfilter G/N 2.4GHz' [AC1]> (capab=0x411 status=0 aid=3)
[  238.735251] wlp2s0: associated
[  238.735379] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

########## wireless info END ############
I'm hoping that you guys have more ideas for me :D
↧

[ubuntu] Remote connect from home to office Ubuntu server - best tool

May 21, 2016, 2:57 pm
$
0
0
At present, I am using SSH to connect to an Ubuntu server but from within the network, ie same router. I would like to be able to connect to the same server from home. The server has no gui, so I would just be connecting to the terminal. Is "ssh" the best tool or is there something better? If ssh, how do I connect to and get through the router?
↧

OpenVPN stops all traffic on Ethernet after ~60minutes

May 21, 2016, 6:51 pm
$
0
0
Good morning, I'm hoping someone can help me with solving a very frustrating issue.

After having my internet connection snooped on more than one occasion, I have started using a VPN to encrypt my traffic. However, after approx 60 minutes, all my traffic will stop abruptly. I have spent the last 5 hours trawling the internet to find a solution but nil joy.

My setup is as follows:
Ubuntu 16.04 LTS
ASRock mini-itx motherboard with Ethernet built in
Linksys wrt1900ac
The computer is connected to the router via a 1gigabit cable.

I have installed the OpenVPN packages and are managing my settings via the gnome network manager.

The VPN connects fine and will work as per normal (including an IP check) until approx 60 minutes, then all traffic stops. The only way to get traffic working again is to either disconnect the VPN (not desirable) or restart the machine (where my frustration lies as I am in the middle of working).

Self fix #1 - Initial searches indicated it might have been a DNS issue from my ISP, that it was blocking access because I was using a VPN. I changed my DNS to the DNS.watch no logging servers on both the network connection and VPN, rebooted, but this did not fix the issue.

Self fix #2 - Another search indicated it may have been a firewall issue, so I ran the remove command for both firestarter and ufw, rebooted, but this did not fix the issue either.

Self fix #3 - I tried the option "apply to traffic on this network only" but that results in everything bypassing the VPN.

I can't see how it's the VPN though, as I tested it on my Android phone and it does not drop out or stall at all. I can't see it being the router either as all my other devices are working fine.

The only skerrick of an idea of where to head next is the IP tables, but I would have no idea where to start, and I'm at my wit's end already.

Advice please? Thanks in advance.
↧
↧

[kubuntu] cannot make settings in connection editor stick

May 21, 2016, 8:40 pm
$
0
0
Just installed 16.04 into a zotac nano and am having trouble with the connection editor. Install went great, no trouble. Now that that is done, I need to make the Eth0 IP address a static and make the unit be a server. The connection editor won't behave. Everytime I try, it pops up a message about it failing and won't connect again. It won't even behave when I try to set it back to auto. Had to go through every setting and click remove multiple times. Also, the ethernet port wants to glom-on to the windows box on the network switch and pretend it's gateway is 169.254.0.0. Even when I turn off the windowsbox this computer still wants to pick that address. It's only after I turn off the windowsbox and bootup twice does it start connecting.

There is something very wrong with the connection editor or the network manager with 16.04. This is the 3rd computer I've tried it on, all 3 have problems with manual settings.
↧

bluetooth keyboard randomly disconects

May 21, 2016, 8:56 pm
$
0
0
iam using ubuntu 16.04 and i have tried 2 brand new logitech keyboards and they randomly disconnect and refuse to reconnect keybaords are the wirless 810 logitech
↧

[ubuntu] Wifi and Ethernet don't work properly

May 22, 2016, 6:12 am
$
0
0
I recently was trying to create a WiFi hotspot using a wired connection and used a third party package to do it. Somehow it backfired and my WiFi and Ethernet stopped working properly. For a time, there was a constant "Network Service Discovery Disabled" messaged, but that doesn't appear anymore.
I removed the network manager using purge and reinstalled using live CD but it's still the same.
The networking icon isn't showing and System Settings>Network doesn't open either.
Moreover, it's still connected to my WiFi and every page loads after about 10 reloads (except YouTube).

Is there anyway to fix it or should I just do a clean install?
↧
Search

[kubuntu] Cannot edit wireless network settings

May 22, 2016, 11:48 am
$
0
0
I'm at a friend's house trying to connect to their wireless network. I click on the Network Manager icon in the bottom panel (KDE here), find the router's SSID, enter the password for it and click connect. Apparently the password was incorrect but now I can't change it. I try to type it in fresh and click connect but it fails so quickly that I don't think it's even trying.

Next, I click to the wrench icon to edit the connection. On the wireless security tab, the password is there. I tried to change it but I can't. I can type in a new password but the "OK" button is greyed out. Why is this?

I rebooted the computer and have the same problem.
↧
↧

[SOLVED] 16.04 64bit server. Can't set static address. Who ordered enp3so?

May 22, 2016, 1:20 pm
$
0
0
Hi All,

I decided to set up a Plex media server and as a first step sorted out a decent machine. Installed a newly downloaded version as shown above. Install flew in no problem. Set up root passwd. Then I wanted to set a static ip address. So edit /etc/network/interfaces. No eth0. Why wasn't I told about this. Tried to bluff my way to success by old way of setting static address but no good, update call gave me a load of errors but no update. I guess there is a new way of doing something that I didn't catch.
I can't find an answer on the net and I can't find an answer to an enquiry 'enp3so' in the forums.

Guidance on where we are now with this new (since my last server install of 14.04) way of doing things will be hugely appreciated.

best regards,

brawd.

OK found a couple of references on Youtube. I must say that they are all different to what I'm getting on my screen with my installation so obviously things are much too volatile for me to be successful with 16.04. In view of my weaknesses I'm going to mark this as solved though it isn't.

brawd.
↧

[lubuntu] Lubuntu 16.04 on Acer Aspire One AOA 110-Ap netbook - atheros wifi fails on cold boot

May 23, 2016, 4:41 am
$
0
0
The Atheros AR2425 wifi on this old netbook has always been very reliable with all previous versions of lubuntu, but after upgrading to lubuntu 16.04, it has a strange problem. On turning on the netbook from cold, the wifi never works - it is unable to see any network. Asking it to ping my router just gets a response of 'Network is unreachable'.

Rebooting (usually just once, but 2 or 3 times on rare occasions) gets the wifi working, and once this is acheived it is rock solid - no wifi problems until the next time it is turned on from cold.

I briefly considered whether this might be an intermittent problem indicative of an impending hardware failure - but I think not - its behaviour is very consistent, and a friend with the exact same model of netbook is experiencing exactly the same problem.

I downloaded and ran the wireless-info script - once after a reboot with the wifi working, and the following day after a cold boot, with the wifi not yet working. I then ran diff --suppress-common-lines on the two resultant wireless-info.txt files. The diff gave a large amount of output which I have looked through, but I'm afraid I don't know enough to recognise where the problem lies, and I would be grateful for advice on what it reveals.

I am uploading three files with this message - all compressed due to the file size limit of the forum: the output of the wireless-info script after a cold boot, and after a warm boot, and the output of running diff against these two output files.

Thanks in anticipation
Alan
↧

DNScrypt + start deleted to break ordering cycle starting with sockets.target/start

May 23, 2016, 5:29 am
$
0
0
Hi!

At boot.log:

SKIP [0m] Ordering cycle found, skipping dnscrypt-proxy listening socket


I get this error @ DNScrypt:

intel@666:~$ systemctl status dnscrypt-proxy.socket -l
● dnscrypt-proxy.socket - dnscrypt-proxy listening socket
Loaded: loaded (/etc/systemd/system/dnscrypt-proxy.socket; enabled; vendor preset: enabled)
Drop-In: /etc/systemd/system/dnscrypt-proxy.socket.d
└─override.conf
Active: inactive (dead)
Listen: 127.0.0.1:53 (Stream)
127.0.0.1:53 (Datagram)


Mai 23 14:03:18 666 systemd[1]: dnscrypt-proxy.socket: Job dnscrypt-proxy.socket/start deleted to break ordering cycle starting with sockets.target/start

/etc/systemd/system/dnscrypt-proxy.socket.d/override.conf
[Socket]
ListenStream=
ListenDatagram=
ListenStream=127.0.0.1:53
ListenDatagram=127.0.0.1:53

Can someone help please?
↧

[ubuntu] Authentication is required to start rpc-statd.service

May 23, 2016, 5:44 am
$
0
0
I use my laptop as my NFS server and my desktop as an NFS client. I recently upgraded the desktop to Ubuntu 16.04 (it was on Ubuntu 14.04 before). The laptop/server is on Ubuntu 14.04, and I didn't' change anything on it. For some reason, after the upgrade, I had to comment out the only active line in /etc/hosts.deny on the laptop/server to get my NFS share to mount:
Quote:
rpcbind mountd nfsd statd lockd rquotad : ALL
/etc/hosts.allow contains references to all the network adapters on my desktop.

After doing that, I'm able to mount the NFS share on the laptop/server on my desktop, but strangely, I'm prompted to authenticate with this message:
Quote:
Authentication is required to start rpc-statd.service.
I enter the root password for the desktop (OK, to be honest I think it's the root password for the desktop, but the root password is the same on both computers) and my NFS share mounts.

I'd love to be able to fix both these problems, especially the problem with having to authenticate to get my NFS share to mount. Does anyone have any ideas?

Update:

The output for 'll /sbin/rpc.statd' on the client/desktop is:
Quote:
-rwxr-xr-x 1 root root 77728 Apr 6 09:18 /sbin/rpc.statd*
On the laptop/server:
Quote:
-rwxr-xr-x 1 root root 77728 Apr 6 09:18 /sbin/rpc.statd*
No difference that I can see, except for the date, and rights seem correct so that world should be able to access rpc.statd.
↧
↧

Vpn l2tp

May 23, 2016, 7:39 am
$
0
0
How to make a connection by L2TP protocol under Ubuntu 16?
↧

Xubuntu 15.10 - Mobile Broadband gets connected, but no Internet Access

May 23, 2016, 8:35 am
$
0
0
Since I've upgraded to xubuntu 15.10, I'm facing this issue, it wasn't there upto 14.04 LTS. For my Airtel Data Card (Huawei E1731), I created a new connection from the New Mobile Broadband connection menu of NetworkManager. However, when I click on it, connection is established, but I'm unable to browse the internet. Firefox shows the offline page and when I do ping google.com, it just times out.

However, sometimes when I do different things like disconnect and reconnect, restart the network-manager service, etc., I'm able to browse the internet again. This is the same issue which was faced by this other user which somehow got resolved as his menu is showing Auto Ethernet instead of New Mobile Broadband connection after some experimentation. But I couldn't replicate the same fix and seeking a permanent fix for this problem. I don't want to upgrade to 16.04 just to solve this issue as there is no guarantee that it will be fixed there. Please help.
↧
Search

[ubuntu] Is there a USB 3.0 to Gigabit that works on Ubuntu server?

May 23, 2016, 9:18 am
$
0
0
I have now 3 type USB Gigabit adapters. They just don't work good on Ubuntu server. I have to use a old Linksys USB300M 10/100 and it works good only it's not a 1000 gigabit one. I did get a Linksys all most just like it only Gigabit USB3GIGV1 but just don't work good with Ubuntu server. Now I have a USB 3.1 with power and Gigabit. Type-C to Hub says Linux support too. But it keeps going off and on saying 10 or 100 or a 1000 and full or half but just will not stay on the 1000 full!

Running "Ubuntu 16.04 LTS" as a server on one of the new Intel Compute sticks with USB 3.1 on it. Kernel Version 4.4.0-22-generic (SMP) x86_64

So I need some USB 3.1 with Gigabit and power and be nice to have at lest 2 USB 3.0 ports on it too.

When I do a "dhclient" command on it. It takes a long time like a minute to come back and does not get a IP.

Maybe I need some driver? I think it's a real tech chip set.

Here is a little info of it, from this command: lshw -C network

*-network:1
description: Ethernet interface
physical id: 2
logical name: enx00e04c68045a
serial: 00:e0:4c:68:04:5a
size: 100Mbit/s
capacity: 1Gbit/s
capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=off broadcast=yes driver=r8152 driverversion=v1.08.2 duplex=full link=no multicast=yes port=MII speed=100Mbit/s

I open it up and seen on the small Ethernet chip this number RTL8153 and looked it up and found a driver:

LINUX driver for kernel 3.x 2.06.0 2016/2/23 32k Global but it just downloads a file name "0004-r8152.53-2.06.0" doing a nano on it, the file starts like this:

Quote:
r8152-2.06.0/^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^$

ACTION!="add", GOTO="usb_realtek_net_end"
SUBSYSTEM!="usb", GOTO="usb_realtek_net_end"
ENV{DEVTYPE}!="usb_device", GOTO="usb_realtek_net_end"

# Modify this to change the default value
ENV{REALTEK_NIC_MODE}="1"

# Realtek
ATTR{idVendor}=="0bda", ATTR{idProduct}=="8153", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE} ", ATTR{bConfigurationVal$
ATTR{idVendor}=="0bda", ATTR{idProduct}=="8152", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE} ", ATTR{bConfigurationVal$

# Samsung
ATTR{idVendor}=="04e8", ATTR{idProduct}=="a101", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE} ", ATTR{bConfigurationVal$
So how would I install that?

Or any one know what one works with Ubuntu 16.04 real good?

-Raymond Day
↧

[ubuntu] Ubuntu 16.04, EW7711ULC

May 23, 2016, 9:32 am
$
0
0
When I am new to linux, and Ubuntu.&nbsp; I love it!. I just have one issue. I purchased an Edimax EW7711ULC, downloaded the linux drivers from Edimax and I tried to make the drivers but run into a __DATE__ error. So I download the mt7620U drivers form MediaTek, and i tried to make the drivers but run into __DATE__ error. After googling for what seemed months i found chenhai github for the driver and sanrath bitBucket for the driver, they both make and install fine. I can see the wireless device in me network list but it says not manged or disconnected. In terminal I typed ifconfig, and iwconfig and got this:

Code:
:~$ ifconfig
enp3s0    Link encap:Ethernet  HWaddr d8:50:e6:3f:b7:16 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:9061 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9061 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:791604 (791.6 KB)  TX bytes:791604 (791.6 KB)

ra0      Link encap:Ethernet  HWaddr 74:da:38:5d:79:83 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:158 errors:0 dropped:0 overruns:0 frame:0
          TX packets:572 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:13978 (13.9 KB)  TX bytes:41184 (41.1 KB)

wlx74da3859c9f9 Link encap:Ethernet  HWaddr 74:da:38:59:c9:f9 
          inet addr:192.168.1.217  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::d1e7:2711:86f1:3542/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:24447 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22874 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:15724247 (15.7 MB)  TX bytes:3983843 (3.9 MB)
and if I do iwconfig

Code:
:~$ iwconfig
enp3s0    no wireless extensions.

wlx74da3859c9f9  IEEE 802.11bgn  ESSID:"Home" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: C8:A7:0A:B5:F8:54 
          Bit Rate=72.2 Mb/s  Tx-Power=20 dBm 
          Retry short limit:7  RTS thr=2347 B  Fragment thr:off
          Power Management:off
          Link Quality=38/70  Signal level=-72 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:31  Missed beacon:0

ra0      Ralink STA  ESSID:""  Nickname:"MT7610U_STA"
          Mode:Auto  Frequency=2.412 GHz  Access Point: Not-Associated 
          Bit Rate:1 Mb/s 
          RTS thr:off  Fragment thr:off
          Link Quality=10/100  Signal level:0 dBm  Noise level:0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0  Missed beacon:0

lo        no wireless extensions.
and I ghanged interface manged=true but still no dice.

What I need help with is to get his card to start up, and also to connect to my network. Thank you for any support or help in this matter.
↧
↧

[ubuntu] Wifi seems to connect, but no internet access - Ethernet works fine

May 23, 2016, 10:11 am
$
0
0
My problem is pretty much in the title already. Here are some infos:

Code:
snckrs@sculptor:~$ ifconfig
eno1      Link encap:Ethernet  HWaddr 40:16:7e:34:1c:84 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19768 errors:0 dropped:106 overruns:0 frame:0
          TX packets:13639 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:17754997 (17.7 MB)  TX bytes:1849751 (1.8 MB)
          Interrupt:20 Memory:f7200000-f7220000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:6404 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6404 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:582793 (582.7 KB)  TX bytes:582793 (582.7 KB)

wlp3s0    Link encap:Ethernet  HWaddr 54:27:1e:7a:1c:9d 
          inet addr:192.168.178.61  Bcast:192.168.178.255  Mask:255.255.255.0
          inet6 addr: fe80::8ac7:50ce:506d:5c4c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:474 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1036 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:87925 (87.9 KB)  TX bytes:114574 (114.5 KB)

snckrs@sculptor:~$
Code:
snckrs@sculptor:~$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
^C
--- 8.8.8.8 ping statistics ---
9 packets transmitted, 0 received, 100% packet loss, time 8062ms

snckrs@sculptor:~$ ping 192.168.178.1
PING 192.168.178.1 (192.168.178.1) 56(84) bytes of data.
^C
--- 192.168.178.1 ping statistics ---
8 packets transmitted, 0 received, 100% packet loss, time 7054ms

snckrs@sculptor:~$
Code:
  *-pci:2
            description: PCI bridge
            product: 8 Series/C220 Series Chipset Family PCI Express Root Port #5
            vendor: Intel Corporation
            physical id: 1c.4
            bus info: pci@0000:00:1c.4
            version: d5
            width: 32 bits
            clock: 33MHz
            capabilities: pci normal_decode bus_master cap_list
            configuration: driver=pcieport
            resources: irq:16 ioport:d000(size=4096) memory:f7100000-f71fffff
          *-network
                description: Wireless interface
                product: RTL8821AE 802.11ac PCIe Wireless Network Adapter
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:03:00.0
                logical name: wlp3s0
                version: 00
                serial: 54:27:1e:7a:1c:9d
                width: 64 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=rtl8821ae driverversion=4.4.0-22-generic firmware=N/A ip=192.168.178.61 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
                resources: irq:30 ioport:d000(size=256) memory:f7100000-f7103fff
↧

[ubuntu] No Network connection

May 23, 2016, 10:15 am
$
0
0
Clean Install 16.04
attempting to connect to wireless results in the following error.

Failed to add/activate connection
(7)The access point/org/freedesktop/Network Manager/access point/0 was not in the scan list

I am baffled.
Neil
↧

[ubuntu] Problem with WiFi connection. W/ wireless-info results.

May 23, 2016, 10:46 am
$
0
0
I have a problem with my WiFi connection. I can not seem to connect to any WiFi network regardless of the security.

I've tried connecting to a WPA, WPA2, None, etc WiFi's but it won't work eventhough I can see the list of available WiFis.

I've ran the "wireless-info" script that was posted in a sticky thread in this section and I've attached the results to this thread.

I'm also posting the results here if you don't feel like downloading:

Code:
########## wireless info START ##########

Report from: 17 Mar 2158 00:31 EDT -0400

Booted last: 07 Feb 2022 16:33 EST -0500

Script from: 27 Sep 2015 00:34 UTC +0000

##### release ###########################

Distributor ID:    Ubuntu
Description:    Ubuntu 14.04.1 LTS
Release:    14.04
Codename:    trusty

##### kernel ############################

Linux 3.18.0-ctx.patch #3 SMP Wed Dec 10 15:36:38 MST 2014 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, tpm_tis.interrupts=0, vt.handoff=7

##### desktop ###########################

Ubuntu

##### lspci #############################

01:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)
    Subsystem: Foxconn International, Inc. Device [105b:e058]
    Kernel driver in use: ath9k

##### lsusb #############################

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 046d:c077 Logitech, Inc.
Bus 001 Device 005: ID 0489:e056 Foxconn / Hon Hai
Bus 001 Device 002: ID 04f2:b490 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
1: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no

##### lsmod #############################

ath9k                136715  0
ath9k_common          25638  1 ath9k
ath9k_hw              455128  2 ath9k_common,ath9k
ath                    29006  3 ath9k_common,ath9k,ath9k_hw
mac80211              674115  1 ath9k
cfg80211              513009  4 ath,ath9k_common,ath9k,mac80211
ath3k                  13331  0
bluetooth            461507  25 bnep,ath3k,btusb,rfcomm

##### interfaces ########################

auto lo
iface lo inet loopback

##### ifconfig ##########################

wlan0    Link encap:Ethernet  HWaddr <MAC 'wlan0' [IF]> 
          inet6 addr: fe80::<IP6 'wlan0' [IF]>/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1648 (1.6 KB)  TX bytes:4864 (4.8 KB)

##### iwconfig ##########################

lo        no wireless extensions.

wlan0    IEEE 802.11abgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated  Tx-Power=16 dBm 
          Retry short limit:7  RTS thr:off  Fragment thr:off
          Power Management:off
         

##### route #############################

Kernel IP routing table
Destination    Gateway        Genmask        Flags Metric Ref    Use Iface

##### resolv.conf #######################

##### network managers ##################

Installed:

    NetworkManager

Running:

root      843    1  0 00:01 ?        00:00:00 NetworkManager

##### NetworkManager info ###############

NetworkManager Tool

State: disconnected

- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            ath9k
  State:            disconnected
  Default:          no
  HW Address:        <MAC 'wlan0' [IF]>

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points
    t1242798_2.4GHz: Infra, <MAC 't1242798_2.4GHz' [AC1]>, Freq 2417 MHz, Rate 54 Mb/s, Strength 100 WPA WPA2
    t1242798_5GHz:  Infra, <MAC 't1242798_5GHz' [AC2]>, Freq 5765 MHz, Rate 54 Mb/s, Strength 100
    ASUSBio:        Infra, <MAC 'ASUSBio' [AN3]>, Freq 2447 MHz, Rate 54 Mb/s, Strength 39 WPA2

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

##### NetworkManager profiles ###########

Sorry, try again.
[[/etc/NetworkManager/system-connections/t1242798_5GHz]] (600 root)
[connection] id=t1242798_5GHz | type=802-11-wireless
[802-11-wireless] ssid=t1242798_5GHz | mac-address=<MAC 'wlan0' [IF]>
[ipv6] method=auto
[ipv4] method=auto

[[/etc/NetworkManager/system-connections/t1242798_5GHz~]] (600 root)
[connection] id=t1242798_5GHz | type=802-11-wireless
[802-11-wireless] ssid=t1242798_5GHz | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=auto

[[/etc/NetworkManager/system-connections/t1242798_2.4GHz]] (600 root)
[connection] id=t1242798_2.4GHz | type=802-11-wireless
[802-11-wireless] ssid=t1242798_2.4GHz | mac-address=<MAC 'wlan0' [IF]>
[ipv6] method=auto
[ipv4] method=auto

##### iw reg get ########################

Region: America/New_York (based on set time zone)

country 00:
    (2402 - 2472 @ 40), (3, 20)
    (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
    (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
    (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
    (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS

##### iwlist channels ###################

lo        no frequency information.

wlan0    32 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 100 : 5.5 GHz
          Channel 104 : 5.52 GHz
          Channel 108 : 5.54 GHz
          Channel 112 : 5.56 GHz
          Channel 116 : 5.58 GHz
          Channel 120 : 5.6 GHz
          Channel 124 : 5.62 GHz
          Channel 128 : 5.64 GHz
          Channel 132 : 5.66 GHz
          Channel 136 : 5.68 GHz
          Channel 140 : 5.7 GHz

##### iwlist scan #######################

lo        Interface doesn't support scanning.

Channel occupancy:

      1  APs on  Frequency:2.417 GHz (Channel 2)
      1  APs on  Frequency:5.765 GHz

wlan0    Scan completed :
          Cell 01 - Address: <MAC 't1242798_2.4GHz' [AC1]>
                    Channel:2
                    Frequency:2.417 GHz (Channel 2)
                    Quality=70/70  Signal level=-28 dBm 
                    Encryption key:on
                    ESSID:"t1242798_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000009ae2bb43
                    Extra: Last beacon: 72ms ago
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: <MAC 't1242798_5GHz' [AC2]>
                    Channel:153
                    Frequency:5.765 GHz
                    Quality=70/70  Signal level=-39 dBm 
                    Encryption key:off
                    ESSID:"t1242798_5GHz"
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000009adb3c07
                    Extra: Last beacon: 72ms ago

##### module infos ######################

[ath9k]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
license:        Dual BSD/GPL
description:    Support for Atheros 802.11n wireless LAN cards.
author:        Atheros Communications
srcversion:    5CA20ABDB2778F3165E3ED9
depends:        ath9k_hw,mac80211,ath9k_common,cfg80211,ath
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512
parm:          debug:Debugging mask (uint)
parm:          nohwcrypt:Disable hardware encryption (int)
parm:          blink:Enable LED blink on activity (int)
parm:          btcoex_enable:Enable wifi-BT coexistence (int)
parm:          bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int)
parm:          ps_enable:Enable WLAN PowerSave (int)

[ath9k_common]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko
license:        Dual BSD/GPL
description:    Shared library for Atheros wireless 802.11n LAN cards.
author:        Atheros Communications
srcversion:    94B4F03FB0E70D4D2C6AD91
depends:        cfg80211,ath9k_hw,ath
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512

[ath9k_hw]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
license:        Dual BSD/GPL
description:    Support for Atheros 802.11n wireless LAN cards.
author:        Atheros Communications
srcversion:    715A6023A3AE8A8FB5869EF
depends:        ath
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512

[ath]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/drivers/net/wireless/ath/ath.ko
license:        Dual BSD/GPL
description:    Shared library for Atheros wireless LAN cards.
author:        Atheros Communications
srcversion:    0D7DE85EF15890F115735E2
depends:        cfg80211
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512

[mac80211]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:    7EEF5988245D414BA91F27D
depends:        cfg80211
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512
parm:          max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:          max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:          beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:          probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:          ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:        Johannes Berg
srcversion:    C8543A08D2650C7BC1B7107
depends:       
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512
parm:          ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:          cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

[ath3k]
filename:      /lib/modules/3.18.0-ctx.patch/kernel/drivers/bluetooth/ath3k.ko
firmware:      ath3k-1.fw
license:        GPL
version:        1.0
description:    Atheros AR30xx firmware driver
author:        Atheros Communications
srcversion:    C337943CFD92B950F279B89
depends:        bluetooth
intree:        Y
vermagic:      3.18.0-ctx.patch SMP mod_unload modversions
signer:        Magrathea: Glacier signing key
sig_key:        78:40:98:D9:99:62:AD:94:06:29:DB:7D:A4:37:97:3F:64:1B:F7:32
sig_hashalgo:  sha512

##### module parameters #################

[ath9k]
blink: 0
bt_ant_diversity: 0
btcoex_enable: 0
nohwcrypt: 0
ps_enable: 0

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
probe_wait_ms: 500

[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc
lp
rtc

##### modprobe options ##################

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en

[/etc/modprobe.d/snd-hda-intel.conf]
options snd-hda-intel model=,alc283-dac-wcaps

##### rc.local ##########################

chgrp plugdev /sys/class/backlight/intel_backlight/brightness
chmod 664 /sys/class/backlight/intel_backlight/brightness

exit 0

##### pm-utils ##########################

[/etc/pm/sleep.d/00_screen] (755 root)
getXuser() {
        export user=`pinky -fw | awk '{ if ($2 == ":'$displaynum'" || $(NF) == ":'$displaynum'" ) { print $1; exit; } }'`
}
for x in /tmp/.X11-unix/*; do
    displaynum=`echo $x | sed s#/tmp/.X11-unix/X##`
    getXuser;
    case "$1" in
    thaw|resume)
        getXuser;
        sudo -u $user env DISPLAY=":$displaynum" /usr/bin/xrandr --auto
            ;;
    *)
            ;;
    esac
done
exit 0

[/etc/pm/sleep.d/99wifi] (755 root)
case "${1}" in
        hibernate)
        sudo service network-manager stop
        /sbin/rmmod ath9k
                ;;
    resume|thaw)
                /sbin/modprobe ath9k
        sudo service network-manager restart
        ;;
esac
exit 0

[/etc/pm/sleep.d/99zcyapa] (755 root)
getXuser() {
        user=`pinky -fw | awk '{ if ($2 == ":'$displaynum'" || $(NF) == ":'$displaynum'" ) { print $1; exit; } }'`
        if [ x"$user" = x"" ]; then
                startx=`pgrep -n startx`
                if [ x"$startx" != x"" ]; then
                        user=`ps -o user --no-headers $startx`
                fi
        fi
        if [ x"$user" != x"" ]; then
                userhome=`getent passwd $user | cut -d: -f6`
                export XSESSIONRC=$userhome/.xsessionrc
        else
                export XSESSIONRC=""
        fi
}
case "${1}" in
    hibernate)
    /sbin/rmmod cyapa
        ;;
    resume|thaw)
        COUNTER=0
        while [  $COUNTER -lt 10 ]; do
            date >>/tmp/99_cyapa
            /sbin/modprobe cyapa
        sleep 1
        dmesg | grep cyapa | tail -1 | grep "\(error\|fail\)" >/dev/null
        RES=$?
        if [ ${RES} -ne 1 ] ; then
        /sbin/rmmod cyapa
        sleep 1
        else
        #done
        COUNTER=11
        fi
       
            COUNTER=`expr $COUNTER + 1`
        done
        ;;
esac
exit 0

##### udev rules ########################

[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x168c:0x0034 (ath9k)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'wlan0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"

##### dmesg #############################

[    4.908726] ath: phy0: ASPM enabled: 0x43
[    4.908732] ath: EEPROM regdomain: 0x6c
[    4.908733] ath: EEPROM indicates we should expect a direct regpair map
[    4.908736] ath: Country alpha2 being used: 00
[    4.908737] ath: Regpair used: 0x6c
[    5.550709] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  75.335748] wlan0: authenticate with <MAC 't1242798_5GHz' [AC2]>
[  75.348333] wlan0: send auth to <MAC 't1242798_5GHz' [AC2]> (try 1/3)
[  75.349190] wlan0: authenticated
[  75.350039] wlan0: associate with <MAC 't1242798_5GHz' [AC2]> (try 1/3)
[  75.351448] wlan0: RX AssocResp from <MAC 't1242798_5GHz' [AC2]> (capab=0x401 status=0 aid=2)
[  75.351521] wlan0: associated
[  75.351532] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  95.990244] wlan0: deauthenticating from <MAC 't1242798_5GHz' [AC2]> by local choice (Reason: 3=DEAUTH_LEAVING)

########## wireless info END ############
any help is appreciated.



File:
wireless-info(1).txt
Attached Files
↧
Viewing all 23300 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>