Bluetooth Problem Asus X550DP

January 4, 2019, 4:17 pm

≪ Previous: Jumper netbook not connecting to wifi after instaling 18.10

Good day,

I have a small bug or problem that keeps my BT from running normally after a reboot or when I turn BT off then back on. I've used this post https://ubuntuforums.org/showthread.php?t=2399393 to get the BT working but I have to re run the following code after a reboot to get it working again? Is there a way to keep it working or do I just have to deal with it?

Code:

sudo modprobe -v rtbth

Thanks,

↧

Wifi problems

January 4, 2019, 7:34 pm

≫ Next: [ubuntu] Cannot login to SSH Ubuntu 18.04

≪ Previous: Bluetooth Problem Asus X550DP

Hey, all!

Registered here to report exactly the same issue - under Lubuntu.

Found another, similar thread over here: https://askubuntu.com/questions/1104...ating-to-18-04

Like the poster in the other thread, I use a Qualcomm Atheros wifi adapter. Maybe a problem related to the driver?

Thank you! :)

↧

[ubuntu] Cannot login to SSH Ubuntu 18.04

January 4, 2019, 7:45 pm

≫ Next: [ubuntu] Computer freezes when connected to Wifi

≪ Previous: Wifi problems

Hello, I'm trying to login via SSH to my website on Bluehost. The site is already configured and works for SSH as I have already done a database backup prior to switching back to Ubuntu from Windows 10. I need to backup a particular database using SSH. Every time I try to login I get an "Access Denied" error.

I've tried the following:

1. Tried logging in using Putty. When I first installed Ubuntu I knew I would have to access my MySQL on Bluehost via SSH, so I installed it.
2. Tried logging in using "OpenSSH" after giving up on putty and installing it.
3. Tried editing "/etc/ssh/sshd_config" to allow port 22 & set "AllowUsers" to the user login for my Bluehost server. I also enabled "PubkeyAuthentication yes".

No matter what I've done I still get access denied. The password that I'm using is correct when I type it in.

Any help would be greatly appreciated as I need this in order to work with client websites.

↧

[ubuntu] Computer freezes when connected to Wifi

January 5, 2019, 7:04 am

≫ Next: Help with Intel CNVI 9560

≪ Previous: [ubuntu] Cannot login to SSH Ubuntu 18.04

Hi to everybody,

I managed to resolve my problem of connecting to the internet with Wifi , now unfortunately the laptop freezes completely in the instant when it uses internet connected to wifi (now for example I'm using the tethering from the phone and it works fine, even though the wifi is on but not connected to my WLAN).
If I run `dmesg` this parts of text come with errors and red highlighted:

Code:

    [    0.044238] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored

    [    0.044473] ACPI Error: Needed type [Reference], found [Integer]         (ptrval) (20170831/exresop-103)

    [    0.044473] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20170831/dswexec-461)

    [    0.044473] No Local Variables are initialized for Method [_PDC]

    [    0.044473] Initialized Arguments for Method [_PDC]:  (1 arguments defined for method invocation)

    [    0.044473]   Arg0:           (ptrval) <Obj>           Buffer(12) 01 00 00 00 01 00 00 00

    [    0.044473] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170831/psparse-550)

    

    [   22.172591] RT5390_Init: FlgIsHwAntennaDiversitySup --> True

    

    [   83.838255] RT5390SetRxAnt: rt5370G/rt5390R --> switch to main

    [   83.867727] bAutoTxAgcG = 0

    [   83.867732] RTMPSetPhyMode: channel is out of range, use first channel=1 

    [   83.867733] MCS Set = 00 00 00 00 00

    [   83.867734] <==== rt28xx_init, Status=0

    [   83.867827] 0x1300 = 00073200

    [   83.867840]  AUX_CTRL = 0x                            4c02

    [   83.867843]  Read AUX_CTRL = 0x4c02

    [   83.867843]  Write AUX_CTRL = 0x5c02

    [   83.867844]  OSC_CTRL = 0x3ff11

    [   83.867936] ====> rt30xx Read PowerLevelMode =  0x3.

    [   83.867937] ====> rt30xx F Write 0x83 Command = 0x3.

    [   83.869653] ERROR!!! 

    [   83.869653] H2M_MAILBOX still hold by MCU. command fail

    [   83.870076] ERROR!!! 

    [   83.870077] H2M_MAILBOX still hold by MCU. command fail

    [   84.236621] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    [   84.416179] /home/makkekkazzo/RT28XX-RT539X-Linux-driver/os/linux/../../common/cmm_asic.c:2646 assert KeyIdx < 4failed

    [   84.416203] /home/makkekkazzo/RT28XX-RT539X-Linux-driver/os/linux/../../common/cmm_asic.c:2646 assert KeyIdx < 4failed

    [   84.465258] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready

    [   85.457053] ===>rt_ioctl_giwscan. 24(24) BSS returned, data->length = 4731

    [   89.593106] ===>rt_ioctl_giwscan. 28(28) BSS returned, data->length = 5914

    [   96.316164] GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)

    [   96.316167] RT5390_AsicTxAlcGetAutoAgcOffset: Incorrect desired TSSI or current TSSI

    [  100.476125] GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)

    [  100.476148] RT5390_AsicTxAlcGetAutoAgcOffset: Incorrect desired TSSI or current TSSI

    [  104.637101] GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)

    [  104.637104] RT5390_AsicTxAlcGetAutoAgcOffset: Incorrect desired TSSI or current TSSI

    [  108.796159] GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)

    [  108.796162] RT5390_AsicTxAlcGetAutoAgcOffset: Incorrect desired TSSI or current TSSI

    [  112.609131] ===>rt_ioctl_giwscan. 29(29) BSS returned, data->length = 6166

    [  117.120097] GetDesiredTssiAndCurrentTssi: BBP TSSI INFO is not ready. (BbpR47 = 0x94)

    [  117.120114] RT5390_AsicTxAlcGetAutoAgcOffset: Incorrect desired TSSI or current TSSI

    [  117.549394] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=6)

     [  117.682917] systemd-journald[252]: File  /var/log/journal/8d2eda6faa2d81ddcf42bf335405d028/user-1000.journal  corrupted or uncleanly shut down, renaming and replacing.

I don't really know what that means but I hope that it could help you figure out what is going on.

Thanks a lot for the help

↧

Help with Intel CNVI 9560

January 5, 2019, 8:07 am

≫ Next: [lubuntu] wifi adapter stops working after suspend

≪ Previous: [ubuntu] Computer freezes when connected to Wifi

Hi,

I just installed Ubuntu 18.04. It doesn't detect my WiFi adapter (Intel CNVI 9560).

This problem doesn't happen in Win10. Any ideas?

I ran dmesg | grep iwl

Code:

[    6.130762] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)

[    6.141173] iwlwifi 0000:00:14.3: loaded firmware version 34.0.0 op_mode iwlmvm

[    6.183949] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318

[    6.190560] kernel BUG at /build/linux-vxxS7y/linux-4.15.0/drivers/net/wireless/intel/iwlwifi/pcie/rx.c:425!

[    6.190565] Modules linked in: kvm(+) snd_hda_core snd_hwdep iwlmvm(+) irqbypass snd_pcm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mac80211 pcbc snd_seq_midi snd_seq_midi_event aesni_intel snd_rawmidi btusb aes_x86_64 crypto_simd iwlwifi glue_helper cryptd input_leds btrtl snd_seq btbcm intel_cstate btintel joydev snd_seq_device intel_rapl_perf bluetooth snd_timer snd ecdh_generic wmi_bmof intel_wmi_thunderbolt soundcore cfg80211 mei_me mei shpchp intel_pch_thermal acpi_pad mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid i915 mxm_wmi drm_kms_helper igb syscopyarea sysfillrect sysimgblt dca fb_sys_fops e1000e i2c_algo_bit nvme drm ptp ahci i2c_i801 nvme_core pps_core libahci wmi video

[    6.190590] RIP: 0010:iwl_pcie_rxq_alloc_rbs+0x1d0/0x1f0 [iwlwifi]

[    6.190604]  _iwl_pcie_rx_init+0x252/0x710 [iwlwifi]

[    6.190607]  iwl_pcie_rx_init+0x2d/0x3c0 [iwlwifi]

[    6.190613]  ? iwl_mvm_nic_config+0xeb/0x120 [iwlmvm]

[    6.190617]  iwl_trans_pcie_start_fw+0x2a1/0x6c0 [iwlwifi]

[    6.190621]  iwl_mvm_load_ucode_wait_alive+0xec/0x2b0 [iwlmvm]

[    6.190626]  iwl_run_init_mvm_ucode+0x8e/0x330 [iwlmvm]

[    6.190629]  ? iwl_run_init_mvm_ucode+0x8e/0x330 [iwlmvm]

[    6.190632]  ? iwl_wait_init_complete+0x20/0x20 [iwlmvm]

[    6.190636]  iwl_op_mode_mvm_start+0x649/0x920 [iwlmvm]

[    6.190639]  ? iwl_op_mode_mvm_start+0x649/0x920 [iwlmvm]

[    6.190642]  _iwl_op_mode_start.isra.10+0x4c/0xa0 [iwlwifi]

[    6.190644]  iwl_opmode_register+0x75/0xe0 [iwlwifi]

[    6.190648]  iwl_mvm_init+0x38/0x1000 [iwlmvm]

[    6.190692] RIP: iwl_pcie_rxq_alloc_rbs+0x1d0/0x1f0 [iwlwifi] RSP: ffffb01b4400f8a8

↧

[lubuntu] wifi adapter stops working after suspend

January 5, 2019, 9:52 am

≫ Next: [ubuntu] Atheros AR3011 bluetooth doesn't work on Ubuntu 18.04

≪ Previous: Help with Intel CNVI 9560

I'm on Lubuntu 18.10.

every time I suspend my laptop, when I unsuspend it, the wifi adapter stops working.
here's what systemctl logs gave me

Code:

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.6972] device (wlp1s0): supplicant interface state: completed -> disabled

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.7403] device (wlp1s0): supplicant interface state: disabled -> scanning

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.8683] supplicant: wpa_supplicant stopped

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.8685] device (wlp1s0): supplicant interface state: scanning -> down

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.8692] device (wlp1s0): state change: activated -> unavailable (reason 'supplicant-failed', sys-iface-state: 'managed')

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.8786] dhcp4 (wlp1s0): canceled DHCP transaction, DHCP client pid 11111

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.8786] dhcp4 (wlp1s0): state changed bound -> done

jan 05 14:17:23  NetworkManager[11072]: <info>  [1546708643.8799] dhcp6 (wlp1s0): canceled DHCP transaction

jan 05 14:17:24  NetworkManager[11072]: <info>  [1546708644.0296] manager: NetworkManager state is now DISCONNECTED

jan 05 14:17:24  NetworkManager[11072]: <warn>  [1546708644.0978] sup-iface: failed to remove network: The name :1.1556 was not provided by any .service files

I tried restarting the network manager service but it still didn't work, unless I rebooted
here's my wifi adapter from lshw (while adapter was working):

Code:

*-network

                description: Wireless interface

                product: AR9485 Wireless Network Adapter

                vendor: Qualcomm Atheros

                physical id: 0

                bus info: pci@0000:01:00.0

                logical name: wlp1s0

                version: 01

                serial: 9c:b7:0d:9a:96:dc

                width: 64 bits

                clock: 33MHz

                capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless

                configuration: broadcast=yes driver=ath9k driverversion=4.18.0-13-generic firmware=N/A ip=192.168.1.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11

                resources: irq:16 memory:fea80000-feafffff memory:fea70000-fea7ffff

(windows outputted AR5B125 when I checked)
I would appreciate if someone helped me in this issue, not sure if I put it on launchpad or something

↧

[ubuntu] Atheros AR3011 bluetooth doesn't work on Ubuntu 18.04

January 5, 2019, 1:04 pm

≫ Next: [ubuntu] TL-WN881ND Wi-Fi hotspot: low download speed

≪ Previous: [lubuntu] wifi adapter stops working after suspend

I have a desktop PC with "IMC Networks Asus Integrated Bluetooth module [AR3011]" device which doesn't seem to work.
I found a report dated by 2011 saying this thing worked before (2.6.x kernels) https://bugs.debian.org/cgi-bin/bugr...cgi?bug=641749 - which is pretty close to my own... feeling that yeah, it did work before (the same PC).
I'm too lazy to fix problems as soon as the appear, so I've been postponing the resolution of this problem for several years.
Today I told myself that it really needs my attention.
So folks, any ideas where to look at?

Code:



$ lsusb | grep -i bluetooth

Bus 002 Device 004: ID 13d3:3304 IMC Networks Asus Integrated Bluetooth module [AR3011]

↧

[ubuntu] TL-WN881ND Wi-Fi hotspot: low download speed

January 6, 2019, 8:32 am

≫ Next: [ubuntu] Qualcomm Atheros QCA9565 / AR9565, when BLuetooth is on used Wifi is slowed

≪ Previous: [ubuntu] Atheros AR3011 bluetooth doesn't work on Ubuntu 18.04

Hi! I have Ubuntu 18.04 PC with wired internet connection (~90 Mbits/s) and PCI-E Wi-Fi TP-Link TL-WN881ND (EU) Ver.2.0 card, working in Wi-Fi hotspot mode.
My Ubuntu OS recognized it automatically upon installation, but when I connect my Mint laptop (or Android smartphone) to it, the download speed is very low: about 600 - 800 Kbits/s (tested via Iperf). In the meantime, upload speed is much greater: ~6 Mbits/sec.
I've done some searching around, turned off the power saving feature, switched antennas using ant-sel flag, but nothing helped.
I've also downloaded and installed driver from the official manufacturer's site, but it didn't help me either.
Will appreciate any advice.

Attached Files

wireless-info.tar.gz (5.8 KB)

↧

[ubuntu] Qualcomm Atheros QCA9565 / AR9565, when BLuetooth is on used Wifi is slowed

January 6, 2019, 11:16 am

≫ Next: [ubuntu] 10 GBs Network | incrementing rx_csum_offload_errors via ethtool

≪ Previous: [ubuntu] TL-WN881ND Wi-Fi hotspot: low download speed

Hello,

I know that Qualcomm Atheros QCA9565 / AR9565 manage Bluetooth and Wifi, when I connect my bluetooth headset the wifi decrease and/or does not response.
I'm also new to Ubuntu.

Some info:

Code:

root@yendroid:/home/jean-christophe# inxi -Fxz

System:    Host: yendroid Kernel: 4.18.0-13-generic x86_64 bits: 64 compiler: gcc v: 8.2.0 

           Desktop: Gnome 3.30.1 Distro: Ubuntu 18.10 (Cosmic Cuttlefish) 

Machine:   Type: Laptop System: ASUSTeK product: X751LJ v: 1.0 serial: <filter> 

           Mobo: ASUSTeK model: X751LJ v: 1.0 serial: <filter> UEFI: American Megatrends v: X751LJ.706 

           date: 12/07/2015 

Battery:   ID-1: BAT0 charge: 30.7 Wh condition: 32.2/37.4 Wh (86%) model: ASUSTeK ASUS Battery 

           status: Not charging 

           Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M560 charge: 0% status: Discharging 

CPU:       Topology: Dual Core model: Intel Core i5-5200U bits: 64 type: MT MCP arch: Broadwell rev: 4 

           L2 cache: 3072 KiB 

           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 17575 

           Speed: 1076 MHz min/max: 500/2700 MHz Core speeds (MHz): 1: 850 2: 871 3: 846 4: 854 

Graphics:  Device-1: Intel HD Graphics 5500 driver: i915 v: kernel bus ID: 00:02.0 

           Device-2: NVIDIA GK208BM [GeForce 920M] driver: nvidia v: 390.87 bus ID: 04:00.0 

           Display: server: X.Org 1.20.1 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa 

           resolution: 1600x900~60Hz 

           OpenGL: renderer: GeForce 920M/PCIe/SSE2 v: 4.6.0 NVIDIA 390.87 direct render: Yes 

Audio:     Device-1: Intel Broadwell-U Audio driver: snd_hda_intel v: kernel bus ID: 00:03.0 

           Device-2: Intel Wildcat Point-LP High Definition Audio driver: snd_hda_intel v: kernel 

           bus ID: 00:1b.0 

           Sound Server: ALSA v: k4.18.0-13-generic 

Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: 2.3LK-NAPI 

           port: e000 bus ID: 02:00.1 

           IF: enp2s0f1 state: down mac: <filter> 

           Device-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter driver: ath9k v: kernel 

           bus ID: 03:00.0 

           IF: wlp3s0 state: up mac: <filter> 

Drives:    Local Storage: total: 465.76 GiB used: 9.49 GiB (2.0%) 

           ID-1: /dev/sda vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB temp: 37 C 

Partition: ID-1: / size: 456.96 GiB used: 9.49 GiB (2.1%) fs: ext4 dev: /dev/sda2 

Sensors:   System Temperatures: cpu: 49.0 C mobo: 27.8 C gpu: nvidia temp: 47 C 

           Fan Speeds (RPM): cpu: 2100 

Info:      Processes: 245 Uptime: 1h 01m Memory: 11.60 GiB used: 2.63 GiB (22.7%) Init: systemd runlevel: 5 

           Compilers: gcc: 8.2.0 Shell: bash v: 4.4.19 inxi: 3.0.24 

root@yendroid:/home/jean-christophe#

Code:

root@yendroid:/home/jean-christophe#  rfkill list

0: phy0: Wireless LAN

    Soft blocked: no

    Hard blocked: no

1: hci0: Bluetooth

    Soft blocked: no

    Hard blocked: no

root@yendroid:/home/jean-christophe#

Code:

root@yendroid:/home/jean-christophe# systool -vm ath9k

Module = "ath9k"



  Attributes:

    coresize            = "151552"

    initsize            = "0"

    initstate           = "live"

    refcnt              = "0"

    srcversion          = "893A0832FB72FDD7D4005A5"

    taint               = ""

    uevent              = <store method only>



  Parameters:

    blink               = "0"

    bt_ant_diversity    = "0"

    btcoex_enable       = "1"

    led_active_high     = "-1"

    nohwcrypt           = "0"

    ps_enable           = "0"

    use_chanctx         = "0"

    use_msi             = "0"



  Sections:

    .bss                = "0xffffffffc06c6a00"

    .data               = "0xffffffffc06c6000"

    .exit.text          = "0xffffffffc06bfcc5"

    .gnu.linkonce.this_module= "0xffffffffc06c66c0"

    .init.rodata        = "0xffffffffc045d000"

    .init.text          = "0xffffffffc045c000"

    .note.gnu.build-id  = "0xffffffffc06c0000"

    .parainstructions   = "0xffffffffc06c5c30"

    .rodata             = "0xffffffffc06c0040"

    .rodata.str1.1      = "0xffffffffc06c4ab7"

    .rodata.str1.8      = "0xffffffffc06c4210"

    .smp_locks          = "0xffffffffc06c5a10"

    .strtab             = "0xffffffffc0463598"

    .symtab             = "0xffffffffc045e000"

    .text               = "0xffffffffc06a7000"

    .text.unlikely      = "0xffffffffc06bfcef"

    __bug_table         = "0xffffffffc06c6518"

    __mcount_loc        = "0xffffffffc06c38c0"

    __param             = "0xffffffffc06c5ac8"



root@yendroid:/home/jean-christophe#

Code:

root@yendroid:/home/jean-christophe# service bluetooth status

● bluetooth.service - Bluetooth service

   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)

   Active: active (running) since Sun 2019-01-06 19:03:46 CET; 1h 8min ago

     Docs: man:bluetoothd(8)

 Main PID: 859 (bluetoothd)

   Status: "Running"

    Tasks: 1 (limit: 4915)

   Memory: 2.9M

   CGroup: /system.slice/bluetooth.service

           └─859 /usr/lib/bluetooth/bluetoothd



janv. 06 19:03:46 yendroid systemd[1]: Starting Bluetooth service...

janv. 06 19:03:46 yendroid bluetoothd[859]: Bluetooth daemon 5.50

janv. 06 19:03:46 yendroid bluetoothd[859]: Starting SDP server

janv. 06 19:03:46 yendroid bluetoothd[859]: Bluetooth management interface 1.14 initialized

janv. 06 19:03:46 yendroid systemd[1]: Started Bluetooth service.

janv. 06 19:04:02 yendroid bluetoothd[859]: Endpoint registered: sender=:1.307 path=/MediaEndpoint/A2DPSource

janv. 06 19:04:02 yendroid bluetoothd[859]: Endpoint registered: sender=:1.307 path=/MediaEndpoint/A2DPSink

janv. 06 19:05:34 yendroid bluetoothd[859]: Unable to get Headset Voice gateway SDP record: Host is down

janv. 06 19:24:44 yendroid bluetoothd[859]: /org/bluez/hci0/dev_CC_98_8B_3D_E2_AB/fd0: fd(37) ready

root@yendroid:/home/jean-christophe#

Code:

root@yendroid:/home/jean-christophe# dpkg -l | grep blue

rc  blueman                                    2.0.5-1ubuntu1                                amd64        Graphical bluetooth manager

ii  bluez                                      5.50-0ubuntu1                                 amd64        Bluetooth tools and daemons

ii  bluez-cups                                 5.50-0ubuntu1                                 amd64        Bluetooth printer driver for CUPS

ii  bluez-obexd                                5.50-0ubuntu1                                 amd64        bluez obex daemon

ii  gir1.2-gnomebluetooth-1.0:amd64            3.28.2-2                                      amd64        Introspection data for GnomeBluetooth

ii  gnome-bluetooth                            3.28.2-2                                      amd64        GNOME Bluetooth tools

ii  libbluetooth3:amd64                        5.50-0ubuntu1                                 amd64        Library to use the BlueZ Linux Bluetooth stack

ii  libgnome-bluetooth13:amd64                 3.28.2-2                                      amd64        GNOME Bluetooth tools - support library

ii  pulseaudio-module-bluetooth                1:12.2-0ubuntu4                               amd64        Bluetooth module for PulseAudio sound server

root@yendroid:/home/jean-christophe#

I followed the advice from https://wireless.wiki.kernel.org/en/...s/ath9k/btcoex
I tried to add in /etc/modprobe/ a conf file as ath9k.conf with the btcoex_enable=1 and reboot but this did not fix my issue.
I also tried :

Quote:

btcoex_enable=1
bt_ant_diversity=1

and

Quote:

btcoex_enable=1
bt_ant_diversity=1
nohwcrypt=1

I also try to blacklist asus_nd_wmi, without any success.

Do you have an idea to solve my problem?

Thank you very much.

↧

[ubuntu] 10 GBs Network | incrementing rx_csum_offload_errors via ethtool

January 6, 2019, 11:59 am

≫ Next: [ubuntu] Failed to get the server's share list: Connection time expired

≪ Previous: [ubuntu] Qualcomm Atheros QCA9565 / AR9565, when BLuetooth is on used Wifi is slowed

I have just changed to a 10GB switch in my LAN - all our servers are now communicating well (at first glance):

:~$ ethtool ens4
Settings for ens4:
Supported ports: [ TP ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 10000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: external
Auto-negotiation: on
MDI-X: Unknown
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes

Moreover, doing an iperf test to any internal server does show this:

[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 10.9 GBytes 9.32 Gbits/sec

Upon deeper inspection, I can see that errors on the NICs are incrementing

~$ ethtool -S ens4 | grep error
rx_errors: 0
tx_errors: 0
rx_over_errors: 0
rx_crc_errors: 0
rx_frame_errors: 0
rx_fifo_errors: 0
rx_missed_errors: 0
tx_aborted_errors: 0
tx_carrier_errors: 0
tx_fifo_errors: 0
tx_heartbeat_errors: 0
rx_long_length_errors: 0
rx_short_length_errors: 0
rx_csum_offload_errors: 2352

At first, I thought it was an issue with the ring settings, go I pushed it to the max:

~$ ethtool -g ens4
Ring parameters for ens4:
Pre-set maximums:
RX: 4096
RX Mini: 0
RX Jumbo: 0
TX: 4096
Current hardware settings:
RX: 4096
RX Mini: 0
RX Jumbo: 0
TX: 4096

I am now stuck -- after doing some research, I understand that enabling flow control and jumbo packets can help in these cases.
As this is a production environment, I would like your advice on this issue.

↧

[ubuntu] Failed to get the server's share list: Connection time expired

January 6, 2019, 6:22 pm

≫ Next: [server] iptables and DNS: incoming traffic with destination port 53

≪ Previous: [ubuntu] 10 GBs Network | incrementing rx_csum_offload_errors via ethtool

I'm trying to connect to ubuntu 18.04 with a shared folder from windows 10 and get the following error message: "Failed to get the server's share list: Connection time expired."(*)
Can someone help me solve it?

(*)Original message in spanish: "Falló al obtener la lista de compartición del servidor: Expiró el tiempo de conexión".

↧

[server] iptables and DNS: incoming traffic with destination port 53

January 7, 2019, 12:38 am

≫ Next: [ubuntu] Ethernet and Wirless network UNCLAIMED

≪ Previous: [ubuntu] Failed to get the server's share list: Connection time expired

Hi all

I'm currently setting up iptables rules on my web server. Almost everything works as I expect it to work, but for the rules applied to DN lookup queries.
Here is my understanding:

DN lookup requests are sent to the port 53 of DN servers (by default)
DN lookup requests can happen over both TCP and UDP protocols

Therefore, I set up the following rules:

Code:

iptables -A INPUT -p tcp --sport 53 -j ACCEPT

iptables -A INPUT -p udp --sport 53 -j ACCEPT

In other words, accept any incoming connections coming from the port 53 (supposing they are responses for the DN queries my server will send to the port 53).
However, this doesn't work. A nslookup ubuntuforums.org command times out. And here is the part I'm not getting: if I add the iptables rules below, then it works

Code:

iptables -A INPUT -p tcp --dport 53 -j ACCEPT

iptables -A INPUT -p udp --dport 53 -j ACCEPT

If I'm reading the above correctly, it means that I'm accepting incoming connections sent to the port 53 of my server. And I don't understand why this is needed.
I used tcpdump to see what is going on when I run nslookup ubuntuforums.org and I can't see any connections sent to the port 53 of my machine.
There is obviously something I'm missing but I don't know what... Does anyone have an idea?
Thanks in advance.

↧

[ubuntu] Ethernet and Wirless network UNCLAIMED

January 7, 2019, 6:04 am

≫ Next: [ubuntu] Diagnose WiFi Dropping out in Ubuntu but not in Windows-10?

≪ Previous: [server] iptables and DNS: incoming traffic with destination port 53

Hi !
I have a dual boot with ubuntu 16.04 alongside windows 8. A recent update broke my network drivers. I can not have internet acces under linux anymore. Here are few details (some outputs are in french sorry).

A really appreciate your help
Thank you

Code:

***** iwconfig *****



lo        no wireless extensions.

Code:

***** lshw -C network *****



  *-network NON-RÉCLAMÉ   

       description: Network controller

       produit: AR9485 Wireless Network Adapter

       fabriquant: Qualcomm Atheros

       identifiant matériel: 0

       information bus: pci@0000:03:00.0

       version: 01

       bits: 64 bits

       horloge: 33MHz

       fonctionnalités: bus_master cap_list

       configuration: latency=0

       ressources: mémoire:f7900000-f797ffff mémoire:f7980000-f798ffff

  *-network NON-RÉCLAMÉ

       description: Ethernet controller

       produit: AR8161 Gigabit Ethernet

       fabriquant: Qualcomm Atheros

       identifiant matériel: 0

       information bus: pci@0000:04:00.0

       version: 10

       bits: 64 bits

       horloge: 33MHz

       fonctionnalités: bus_master cap_list

       configuration: latency=0

       ressources: mémoire:f7800000-f783ffff portE/S:d000(taille=128)

Code:

***** lspci *****



00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)

00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)

01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)

03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)

04:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)

Code:

***** uname -a *****



Linux lucas-N76VB 4.15.0-36-generic #39~16.04.1-Ubuntu SMP Tue Sep 25 08:59:23 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Code:

***** sudo modprobe -v ath9k *****



modprobe: FATAL: Module ath9k not found in directory /lib/modules/4.15.0-36-generic

I've downloaded the generic package and tried to install it but (answer in french)

Code:

***** sudo dpkg -i block-modules-4.15.0-36-generic-di_4.15.0-36.39_amd64.udeb *****



(Lecture de la base de données... 296005 fichiers et répertoires déjà installés.)

Préparation du dépaquetage de block-modules-4.15.0-36-generic-di_4.15.0-36.39_amd64.udeb ...

Dépaquetage de block-modules-4.15.0-36-generic-di (4.15.0-36.39) ...

dpkg: erreur de traitement de l'archive block-modules-4.15.0-36-generic-di_4.15.0-36.39_amd64.udeb (--install) :

 tentative de remplacement de « /lib/modules/4.15.0-36-generic/kernel/drivers/block/nbd.ko », qui appartient aussi au paquet linux-modules-4.15.0-36-generic 4.15.0-36.39~16.04.1

dpkg-deb : erreur : le sous-processus coller a été tué par le signal (Relais brisé (pipe))

Des erreurs ont été rencontrées pendant l'exécution :

 block-modules-4.15.0-36-generic-di_4.15.0-36.39_amd64.udeb

↧

[ubuntu] Diagnose WiFi Dropping out in Ubuntu but not in Windows-10?

January 7, 2019, 7:02 am

≫ Next: [ubuntu] Ethernet not working on ubuntu 18.04 LTS

≪ Previous: [ubuntu] Ethernet and Wirless network UNCLAIMED

Ever since I started using my "new" PC with Ubuntu 14.10 on my main partition in 2014 with "Think Penguin" TPE-N150USBL dongle, I have had occasional instances of WiFi dropping out.

Currently, with 18.04, WiFi drops out several times per day.
Sometimes, the WiFi indicator on the top panel switches to a "?" & sometimes not.
It can also show "?" when WiFi seems to be working OK.
It never shows the "Empty triangle" sign for no WiFi.
I can always reconnect immediately by clicking > Indicator > my router > Turn Off > Panel > WiFi Off > Turn On.

Other PC's & phones use the same router with absolutely no problem.

On my same PC with same "Think Penguin" WiFi dongle, my Ubuntu LTS (currently 16.04) partition has never shown any problem (but is used less frequently & less long, so maybe proves nothing?).
On same PC & dongle, Windows 10 also has never shown any problem (used infrequently but for long sessions).

So I think I am looking for a problem internal to my main Ubuntu partition, rather than router or dongle?

Over the years, I have often tried to follow troubleshooting guides but never got anywhere.

Can anybody help by pointing to a suitable procedure, or by suggesting steps to start diagnosis?

I just installed "pastebinit" & generated a wireless-info.txt file (while WiFi was working OK) & hopefully attached it...
Should I run wireless-info script again when WiFi is down?

Thanks for any suggestions to help somebody who really has no idea about WiFi!

Thanks!

Attached Files

wireless-info.tar.gz (6.5 KB)

↧

[ubuntu] Ethernet not working on ubuntu 18.04 LTS

January 7, 2019, 9:45 am

≫ Next: [kubuntu] Kubuntu 18.10: Internet not working after Update and Reboot

≪ Previous: [ubuntu] Diagnose WiFi Dropping out in Ubuntu but not in Windows-10?

Hello Community!

I've installed Ubuntu 18.04 LTS after than using Ubuntu 16.04. Nontheless, I had a wired connection error three days ago and I've not been able to fix it. My latptop is ASUS x441U, 7.7 GiB ram, Intel Core i5-7200U COU @ 2.50GHz x4 and 64 bits.

Problem: Wired connection fails. It appears connected, but not working. This problem appeared three days ago, after than an updating. Fortunately, my Wifi is working. Here I'll post some additional information:

Code:

sudo lshw -C network

*-network                 

       descripción: Ethernet interface

       producto: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller

       fabricante: Realtek Semiconductor Co., Ltd.

       id físico: 0

       información del bus: pci@0000:02:00.0

       nombre lógico: enp2s0

       versión: 07

       serie: 88:d7:f6:6f:0a:d2

       tamaño: 100Mbit/s

       capacidad: 100Mbit/s

       anchura: 64 bits

       reloj: 33MHz

       capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation

       configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8106e-1_0.0.1 06/29/12 ip=169.254.254.159 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s

       recursos: irq:16 ioport:d000(size=256) memoria:ef200000-ef200fff memoria:e2100000-e2103fff

  *-network

       descripción: Interfaz inalámbrica

       producto: RTL8821AE 802.11ac PCIe Wireless Network Adapter

       fabricante: Realtek Semiconductor Co., Ltd.

       id físico: 0

       información del bus: pci@0000:03:00.0

       nombre lógico: wlp3s0

       versión: 00

       serie: f0:03:8c:89:a3:ed

       anchura: 64 bits

       reloj: 33MHz

       capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless

       configuración: broadcast=yes driver=rtl8821ae driverversion=4.15.0-43-generic firmware=N/A ip=192.168.1.58 latency=0 link=yes multicast=yes wireless=IEEE 802.11

       recursos: irq:17 ioport:c000(size=256) memoria:ef100000-ef103fff

Also

Code:

sudo dhclient -v enp2s0



Internet Systems Consortium DHCP Client 4.3.5

Copyright 2004-2016 Internet Systems Consortium.

All rights reserved.

For info, please visit https://www.isc.org/software/dhcp/



Listening on LPF/enp2s0/88:d7:f6:6f:0a:d2

Sending on   LPF/enp2s0/88:d7:f6:6f:0a:d2

Sending on   Socket/fallback

DHCPREQUEST of 192.168.1.55 on enp2s0 to 255.255.255.255 port 67 (xid=0x1c641aef)

DHCPACK of 192.168.1.55 from 192.168.1.1

bound to 192.168.1.55 -- renewal in 43043 seconds.

and

Code:

ifconfig

enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 169.254.254.159  netmask 255.255.0.0  broadcast 169.254.255.255

        inet6 fe80::1bd2:3ffb:13c9:c203  prefixlen 64  scopeid 0x20<link>

        ether 88:d7:f6:6f:0a:d2  txqueuelen 1000  (Ethernet)

        RX packets 1149  bytes 201149 (201.1 KB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 1370  bytes 233412 (233.4 KB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 1000  (Bucle local)

        RX packets 9506  bytes 732939 (732.9 KB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 9506  bytes 732939 (732.9 KB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0



wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 192.168.1.58  netmask 255.255.255.0  broadcast 192.168.1.255

        inet6 fe80::9de6:c4c2:e9f:c403  prefixlen 64  scopeid 0x20<link>

        ether f0:03:8c:89:a3:ed  txqueuelen 1000  (Ethernet)

        RX packets 24851  bytes 19089578 (19.0 MB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 25027  bytes 4006778 (4.0 MB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Thank you so much, I'm a beginner and I'm willing to assist in any additional info.

Update 1:
I'v modifyied the resolv.conf file and changed "nameserver 127.0.0.53" by "nameserver 8.8.8.8" and "nameserver 8.8.4.4". This "solution" is temporal

↧

[kubuntu] Kubuntu 18.10: Internet not working after Update and Reboot

January 7, 2019, 6:16 pm

≫ Next: [lubuntu] networking so slow lubuntu 16.04.5 LTS

≪ Previous: [ubuntu] Ethernet not working on ubuntu 18.04 LTS

Hello all,
I've recently installed Kubuntu 18.10 on my HP Laptop.

This particular HP Laptop (which is temporary for now) uses the Realtek RTL8723DE, which doesn't have official support yet out of the box - so after I installed, I had to compile an open-source third party driver (https://h30434.www3.hp.com/t5/Notebo...r/td-p/6477307) to get it to work - after manually downloading from Ubuntu Packages gcc and make, as well as all of the necessary dependencies and moving the packages from my Windows HD to my Linux HD (which was a pain), I logged out, logged back in, and was able to connect to my WiFi no problem.

I decided to install some software and update my system, and now, Wi-Fi seems to be broken, as when I access my computer, my computer doesn't detect any networks and acts as if there was no driver on the computer.

I've tried various commands based on older forum posts to restart the networking service, but the various commands can't find a networking service, and I've tried uninstalling via "sudo make uninstall" and reinstalling, but to no avail, still not working. I've even restarted and went on Windows to see if it's a problem with the hardware which could have died, but Windows is working normally, so there's something wrong on Kubuntu.

Any suggestions or ideas to try would be useful.

Thanks.

↧

[lubuntu] networking so slow lubuntu 16.04.5 LTS

January 7, 2019, 10:35 pm

≫ Next: [ubuntu] WiFi is disabled by hardware switch on HP 15, how to turn it on

≪ Previous: [kubuntu] Kubuntu 18.10: Internet not working after Update and Reboot

i have recently done fresh install of lubuntu as per title and the wireless internet is so slow but the wired connection is good. i have run the script as per instruction here is the paste http://paste.ubuntu.com/p/DjbfjCtxqW/. the system works fine except that i cannot use the wireless connection as it is so unstable and slow
any help is much appreciated

kind regards
Mark

↧

[ubuntu] WiFi is disabled by hardware switch on HP 15, how to turn it on

January 8, 2019, 4:35 am

≫ Next: [ubuntu] Wireless network(WiFi and bluetooth) is intermittent after upgrading to Ubuntu 18.04

≪ Previous: [lubuntu] networking so slow lubuntu 16.04.5 LTS

Hi,
I recently installed ubuntu 18.04 on my HP 15 laptop PC (on a partioned hard disk) on which I already had installed Win 10 (as Multi-Boot System).
Now, in ubuntu 18.04 my WiFi does not work, it is switched off. In the settings-menu for the WiFi tab, I get "No WiFi Adapter Found", and I get "Airplane Mode On", and where I get the WiFi icon, I have WiFi Off.
but the WiFi works just fine under Win 10.

Please can anyone help me on how to switch on the WiFi wireless

I have created a detailed report for troubleshooting wireless problems using the wireless info script created by @varunendra and co, and the link to it on pastebin is https://pastebin.ubuntu.com/p/MJpxSRwqh9/

Thanks in advance for the help

↧

[ubuntu] Wireless network(WiFi and bluetooth) is intermittent after upgrading to Ubuntu 18.04

January 8, 2019, 5:49 am

≫ Next: [xubuntu] Bond Connection doesn't function

≪ Previous: [ubuntu] WiFi is disabled by hardware switch on HP 15, how to turn it on

Recentlt, I have upgraded my OS from 16.04 to 18.04 LTS. Since then, I have been facing a lot of issues with my wireless network. The connection is extremely slow and intermittent. I get disconnected randomly and often.

My Laptop model : HP15 - bs179tx. Any help would be greatly appreciated.

Also, please let me know if you need another information.

↧

[xubuntu] Bond Connection doesn't function

January 8, 2019, 7:20 am

≫ Next: [ubuntu] Files are placed with 0 bytes. Server unexpectedly closes SFTP network connection.

≪ Previous: [ubuntu] Wireless network(WiFi and bluetooth) is intermittent after upgrading to Ubuntu 18.04

Hi Guys, I have LAN connection and and cellphone with LTE (connected to USB). I decided to bond two of them into one to get faster internet. Unfortunately it doesn't use two connections at the same time. Everything seems to be fine, both are connected. After reboot computer decides to use the first of connection or second and never both at the same time. When it uses connection 1 and the cable is removed it never switches to connection 2 the same happens in the opposite situation. I included screenshots of.
- bond connection
--slave 1
--slave 2
I am waiting for your advice

(I tried to use different modes but it's the same)

Attached Images

↧