Quantcast
Channel: Ubuntu Forums - Networking & Wireless
Viewing all 23300 articles
Browse latest View live
↧

cannot ping

September 28, 2017, 11:45 pm
$
0
0
hi


i have two Pc with device USRP N210.The computer connected to the device of USRP N210 using Communication System Toolbox Support Packages. the device connected using the ethernet Cable. The first and second USRP will communicate within omnidirectional.


>> findsdru
Checking radio connections...

ans =

Platform: 'N200/N210/USRP2'
IPAddress: '192.168.10.2'
SerialNum: 'F5E4FF'
Status: 'Success'


Both USRP N210 are successfully connected to the PC but unable to communicate to each other.
I also try ip route get


root@nur-Precision-T1700:~# ip route get 192.168.20.2
192.168.20.2 via 20.20.20.20 dev wlan1 src 20.20.20.103
cache
root@nur-Precision-T1700:~# ip route add 192.168.20.2 via 20.20.20.20




root@nur-Precision-T1700:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 20.20.20.20 0.0.0.0 UG 0 0 0 wlan1
20.20.20.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan1
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.20.2 20.20.20.20 255.255.255.255 UGH 0 0 0 wlan1




root@nur-Precision-T1700:~# ping 192.168.20.2
PING 192.168.20.2 (192.168.20.2) 56(84) bytes of data.
^C
--- 192.168.20.2 ping statistics ---
17 packets transmitted, 0 received, 100% packet loss, time 16128ms

root@nur-Precision-T1700:~# ping 20.20.20.20
PING 20.20.20.20 (20.20.20.20) 56(84) bytes of data.
64 bytes from 20.20.20.20: icmp_seq=1 ttl=64 time=149 ms
64 bytes from 20.20.20.20: icmp_seq=3 ttl=64 time=160 ms
64 bytes from 20.20.20.20: icmp_seq=4 ttl=64 time=0.899 ms
^C
--- 20.20.20.20 ping statistics ---
4 packets transmitted, 3 received, 25% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.899/103.625/160.323/72.769 ms

i also try with the same network but destination host unreachable.

root@nur-Precision-T1700:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 20.20.20.20 0.0.0.0 UG 0 0 0 wlan1
20.20.20.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan1
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0

root@nur-Precision-T1700:~# ping 192.168.10.2
PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.5 icmp_seq=1 Destination Host Unreachable
From 192.168.10.5 icmp_seq=2 Destination Host Unreachable
From 192.168.10.5 icmp_seq=3 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4024ms


I attach figure how the computer connected. I hope someone can enlighten me and can give me the solutions.

Attached Images
↧
Search

[ubuntu] rtl8812AU Make compile failing after upgrade to Custom Kernel

September 29, 2017, 7:13 am
$
0
0
rtl8812AU Make compile is failing after upgrade to Custom Kernel
I have installed 16.0.4 version, after that followed instruction here to install Wireless drivers

$ git clone https://github.com/diederikdehaas/rtl8812AU
$ cd rtl8812AU/
$ make
$ sudo make install
$ sudo modprobe 8812au

Till this point it was successful and wireless worked fine

Now I have installed eve-ng on top of Ubuntu after that I am unable to install back the drivers
Eve-ng installed a custom kernel

http://www.eve-ng.net/index.php/docu...n/bare-install

root@eve-ng:/home/gunny/rtl8812AU# uname -r
4.9.40-eve-ng-ukms-2+


Getting below error when I am trying to compile it

root@eve-ng:/home/gunny/rtl8812AU# make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.9.40-eve-ng-ukms-2+/build M=/home/gunny/rtl8812AU modules
make[1]: *** /lib/modules/4.9.40-eve-ng-ukms-2+/build: No such file or directory. Stop.
Makefile:1576: recipe for target 'modules' failed
make: *** [modules] Error 2
↧
↧

[ubuntu] Ubuntu 14.04.5 - No wireless device detected

September 29, 2017, 10:25 am
$
0
0
(i'm not english, so sorry for my mistakes)

Hi guys,

I just finished to install ubuntu on dual boot with windows 10 in my new laptop. I didn't want to install ubuntu 16.04 because I got a lot of problem with It.
So, after the installation of Ubuntu 14.04.5, my wireless device doesn't working even with ethernet cable. I need your help !

My config :
Intel Core i5-7300HQ CPU 2.50 GHz
GTX 1050 TI 2go
8go ram
↧

[ubuntu] Installed Ubuntu 16.04.3 on a laptop, cannot connect to internet via Arris Surfboard

September 29, 2017, 5:09 pm
$
0
0
I am new to linux and decided to try it out last night, I have no prior experience dealing with networks or resolving issues related to the internet. I installed Ubuntu 16.04.3 last night and it would not connect to the internet after I got it fully installed from a flash drive, this issue has not been resolved after turning the Arris Surfboard SBG6580 modem/router combination off and back on again as well as the laptop, which is a HP m6 notebook, being restarted since last night.

It will not connect over Wifi or either of my Ethernet cables, both of which work just fine to connect my windows 10 laptop to the internet. The Ubuntu laptop is just constantly having 'waves' go up its wifi/internet icon in the top-right. Upon finding the forums I saw the 'Before posting Networking and Wireless' thread and followed its instructions but when I ran the script it only gave me this,
Code:
####### wireless info START #########
Which pretty much tells me nothing and I don't imagine it tells anyone else anything either, but I wanted to complete this step in case anyone can get insight from it or knows what I might have done wrong. The laptop is currently connected to the modem/router via my Ethernet cable and it still has not connected to the internet.

The modem/router has given me plenty of issues before. Recently after start up my windows laptop it connected to the router but not to the internet. Using windows built in trouble shooter this was quickly resolved as the IP address not being configured correctly. The laptop I installed Ubuntu on previously had windows 8 and gave me no end of trouble, it also would not connect to my home wifi either but it would connect to other peoples wifi if I brought it to their house. Windows 8's own troubleshooter however could not solve the problem and I never attempted to fix it as I already had a laptop with windows 10 on that did everything I needed.

Please help I would like to try out Linux/Ubuntu but after spending most of last night trying to solve the problem on my own through google, I am left clueless.
Note: I have no issue formatting the problem laptop and reinstalling everything if you think that will help and I regard this entire thing as a learning experience.
↧

[ubuntu] Wired Connection problems

September 29, 2017, 8:08 pm
$
0
0
I'm running Ubuntu Desktop 16.04. I'm running a Plex server on it. My wired connection stops working after 24hrs and I must reboot the modem/router and computer to get it to work again. I've installed a new network card thinking that might solve it but getting the same issue with the new card. I've attached 2 image of my screen. It was just easier. i ran ifconfig and lshw. Any help would be great. thanks.



network01.jpgnetwork02.jpg
Attached Images
↧
↧

[ubuntu] 17.04 Cannot access smb1 share

September 30, 2017, 2:15 am
$
0
0
I have just replaced Windows 10 on my laptop with 17.04 and everything is running fine except for one problem:

I have two external drives connected to my Asus router and shared using SMB1. These shares are protected with a username and password. I had no problem accessing them from Windows 10, although after the recent WannaCry hooha I had to explicitly enable SMB1 in Windows to access them.

When I try to access the shares from the Files app, I can see the shares double-clicking on them brings up the username/workgroup/password entry box. Entering the correct user credentials however just causes the box to reappear without an error message. If I go to my router and enable guest access (that is, no username/password protection) then I can access the shares without difficulty.

(As an aside, I don't seem to have a smb.conf file on my machine. I have samba installed but Locate can't find one. I don't know if this is relevant or not but I find it a little curious!)
↧

[ubuntu] Ubuntu 16.04: Laptop Bluetooth laggy/erroneous compared to Windows 10

September 30, 2017, 3:00 am
$
0
0
Hi all

I am running Ubuntu on my laptop as a separate partition from Windows. I just got the new Logitech MX Ergo mouse which uses Bluetooth. I noticed that the mouse pointer is "sometimes" laggy, even though the mouse is right next to the laptop! When I boot into Windows, the mouse works perfectly smoothly, so it must be a software or driver issue and not an interference or other physical problem.

By "sometimes laggy", I mean that it works fine for a minute, then it is choppy for a few minutes, fine for a minute again, then choppy, etc.

I had previously noticed that bluetooth reception on this laptop under Ubuntu is rather weak, when I was testing a Bluetooth gamepad. It is a Gigabyte Aero 14 laptop (GTX 1060 version).

What I tried so far to solve the problem, without success:
- Try the solution posted here: https://askubuntu.com/questions/6635...s-time-by-time, including the "sudo modprobe btusb" commands.
- top / htop show no suspicious CPU activity when the Bluetooth mouse is active.

Any ideas how to fix? Are there some drivers I could try updating?

Best regards
ibd

edit: some diagnostics.
Running "dmesg | grep -i blue": https://pastebin.com/mQfepwfT
Running "sudo service bluetooth status": https://pastebin.com/E9wkJChJ
Running "lspci -knn | grep Net -A2": 03:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a) Subsystem: Intel Corporation Wireless 8260 [8086:1010]
Kernel driver in use: iwlwifi"
"hciconfig -a": https://pastebin.com/WLhWva8F
↧

[ubuntu] rlt8723be bluetooth not working in 17.04

September 30, 2017, 12:02 pm
↧
Search

[ubuntu] Need help routing network traffic

September 30, 2017, 7:23 pm
$
0
0
I have to use a VPN where I'm at, but only for traffic that is on the standard :80 port.
Is there a way to setup my system to route all network traffic normally through my interface, but route all :80 traffice to my ppp0 device?
Seems like this should be simple.
↧
↧

Stumped on wireless... Sony vaio ubuntu 16.04

October 1, 2017, 9:12 am
$
0
0
Hello, I did my best to find the solution to this problem but I am out of it.

The fresh install mimics the behavior of the last install in that it connects to wireless, but yields no internet at home.

It seems to work at school, but that's it.

Ethernet works great.

My output is attached for network info, if you have a moment.

-j

https://pastebin.com/6JQxBxJn
↧

Failing to create connectivity between ubuntu and wifi-ethernet

October 1, 2017, 11:33 am
$
0
0
Hello,
I just installed 17.04 after taking a loong break since 9.04 version. I had the same problems with kali linux but managed to solve them.I got a 2800rt usb card attached to the vbox from the device list but i still can not search for wifi. It was bridged and i could connect online like using a ethernet cable.But after a reboot it wont to it either.I got it updated as well.If anyone can help it would be great. Also i run a cmmand to show me the usbs connected to the machine and i could see my usb card!
↧

[ubuntu] Imposible to install mt7610u driver for usb wifi dongle

October 1, 2017, 2:00 pm
$
0
0
I followed this guide https://askubuntu.com/questions/6741...ralink-mt7610u

It doesnt work, the computer doesnt have internet wired access, so i downloaded everything (packages and dependencies) in other computer, copied everything and tried, the error begins with IEEE80211 NUM_BANDS, in make stage, it says that if I meant "NUM_TIDS" because it cant find that num_bands thing, in make install the error is related to a file called mt7610u_sta.ko, it cant find.

Is there any other method for ubuntu 17.10 beta 2?, I havent found a fix for the previous tutorial, in all places its the same, and its supposed to work, or was supposed... I will look to take out the output correctly, like I said, the computer cant connect to internet without the device working.

I googled like hell, can anyone help me? (the device is the one of the tutorial, Ive done lsusb, its detected with same id, but doesnt work.

Thanks.
↧

[ubuntu_mate] Help needed seting up IP camera

October 1, 2017, 5:13 pm
$
0
0
Hello all,
I have tried all weekend, and not succeeded to create a network I want to set up. It is time to ask for help.
I have an IP camera, that I want to have a static address, on a local IP. 10.0.0.15 for example.
I have a wifi connection that I want to still be able to connect to my home wifi with. The computer has an ethernet port, and a wifi device.

at one point I was able to have one or the other, but not both running at the same time. But I screwed it up real bad, and had to delete everything.

So I have been looking at /etc/network/interfaces, and /etc/dhcp/dhcp.conf, and /etc/default/isc-dhcp-server
At this point I am so confused about what to do. I deleted everything, and now i can connect to my home wifi.
The ip camera is physically attached, but no longer picks up an address from the server.

I am only trying to set up IPV4 addressing on the local network.

cat /etc/defualt/isc-dhcp-server
INTERFACESv4="eth0"



/etc/network/interfaces reads:

auto lo
iface lo inet loopback
auto wlan0

auto eth0
iface eth0 inet static
address 10.0.0.42
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.1
dns-nameservers 10.0.0.1


/etc/dhcp/dhcpd.conf reads:
authoritative;

subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.1 192.168.0.254;
option broadcast-address 192.168.0.255;
option routers 192.168.0.1;
default-lease-time 600;
max-lease-time 7200;
option domain-name "local-network";
option domain-name-servers 8.8.8.8, 8.8.4.4;
}


host camera {
hardware-address C4:D6:55:3E:43:72;
fixed-address 10.0.0.15;
}


Perhaps Im missing something silly, I've been trying and not getting it. I just want the local address to run and assign the IP cammera a fixxed static IP, and still be able to connect to the internet on my
home network at the same time. What am I doing wrong here?
↧
↧

[ubuntu] 16.04 bluetooth stopped working

October 2, 2017, 12:42 am
$
0
0
I have Ubuntu 16.04 LTS installed on Asus GL502VMK and regularly working.
this morning my bluetooth Logitech mouse does not connect anymore; it was working until yesterday.
I've initially tried to pair it again with PC but with no success.
It looks like bluetooth it is not anymore available on my PC.
Digging for a reason I've goggled around and found this command:

$ lspci -nnk | grep -iA2 net; echo .; lsusb; echo .; hciconfig -a; echo .; dmesg | egrep -i 'blue|firm'
03:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
Subsystem: Intel Corporation Dual Band Wireless-AC 8260 [8086:0010]
Kernel driver in use: iwlwifi
--
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f]
Kernel driver in use: r8169
Kernel modules: r8169
.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2b Intel Corp.
Bus 001 Device 003: ID 0b05:1837 ASUSTek Computer, Inc.
Bus 001 Device 002: ID 13d3:5666 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
.
hci0: Type: BR/EDR Bus: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:9 acl:0 sco:0 commands:3 errors:0
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: SLAVE ACCEPT

.
[ 1.072139] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.747337] Bluetooth: Core ver 2.22
[ 2.747351] Bluetooth: HCI device and connection manager initialized
[ 2.747353] Bluetooth: HCI socket layer initialized
[ 2.747354] Bluetooth: L2CAP socket layer initialized
[ 2.747359] Bluetooth: SCO socket layer initialized
[ 2.779898] Bluetooth: HCI UART driver ver 2.3
[ 2.779899] Bluetooth: HCI UART protocol H4 registered
[ 2.779899] Bluetooth: HCI UART protocol BCSP registered
[ 2.779900] Bluetooth: HCI UART protocol LL registered
[ 2.779900] Bluetooth: HCI UART protocol ATH3K registered
[ 2.779900] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.779915] Bluetooth: HCI UART protocol Intel registered
[ 2.779921] Bluetooth: HCI UART protocol Broadcom registered
[ 2.779922] Bluetooth: HCI UART protocol QCA registered
[ 2.779922] Bluetooth: HCI UART protocol AG6XX registered
[ 2.779922] Bluetooth: HCI UART protocol Marvell registered
[ 2.864805] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[ 2.864821] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[ 2.864829] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[ 2.864837] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[ 2.866562] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2
[ 2.878516] iwlwifi 0000:03:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
[ 4.772598] Bluetooth: hci0: Reading Intel version information failed (-110)
[ 4.772602] Bluetooth: hci0 command tx timeout
[ 6.498303] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.498304] Bluetooth: BNEP filters: protocol multicast
[ 6.498307] Bluetooth: BNEP socket layer initialized
[ 6.788592] Bluetooth: hci0 command 0xfc05 tx timeout
[ 6.788607] Bluetooth: hci0: Reading Intel version information failed (-110)
[ 8.805210] Bluetooth: hci0 command 0xfc05 tx timeout
[ 8.805211] Bluetooth: hci0: Reading Intel version information failed (-110)

It seems to me the problem could be related to lines "Bluetooth: hci0: Reading Intel version information failed (-110)".

Could anyone help me to solve this issue?

Best Regards,
Gianni
↧

[UbuntuGnome] Realtek rtl8821ae Slow WIFI Transfer

October 2, 2017, 12:58 am
$
0
0
Dear Ubuntu community,
Happy new Ubuntu user here (almost :P).

I finally decided to use Ubuntu for my PC but I'm facing some problems with my WIFI card. I spend more than a week searching for a solution, but I think is time to ask for help!

First, I want to mention that I have a 160 Mbit/s (DOWN) and 10 Mbit/s (UP) internet connection managed by a TP-LINK WDR4300 with DD-WRT.

Days ago, before I switch from WIN10 to Ubuntu, in the same machine I score 120 to 130 Mbit/s (DOWN) and 10 Mbit/s (UP) using speedtest.net, but now in Ubuntu, well, see below:
Code:
michael@force:~$ speedtestRetrieving speedtest.net configuration...
Testing from VTR (xxx.xx.xx.xxx)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by Entel (Santiago) [12.59 km]: 17.495 ms
Testing download speed................................................................................
Download: 47.02 Mbit/s
Testing upload speed....................................................................................................
Upload: 4.85 Mbit/s
michael@force:~$
As you can see, this speed is really low, and also is the MAX transfer rate I'm getting in the LAN.

The DD-WRT stats display a really low RX Rate (6M), in WIN (270+):
Code:
xx:xx:xx:xx:xx:xx    ath1    0:43:48    270M    6M    HT40SGI    -34    -90    56    100%
I have to set some options in "/etc/modprobe.d/rtl8821ae.conf" in order to fix the disconnect issue and also installed the "rtlwifi_new" driver pack from https://github.com/lwfinger/rtlwifi_new.git, and now I can say that I have a relative stable WIFI but very slow. Please note, with the rtl8821ae.conf param the disconnect issue was fixed in the stock driver and later in the rtlwifi_new driver, but the transfer speed is the same in both drivers.

Here you have the results of the wireless-info script.

Code:

########## wireless info START ##########


Report from: 02 Oct 2017 02:23 -03 -0300


Booted last: 02 Oct 2017 00:00 -03 -0300


Script from: 25 Mar 2017 07:04 UTC +0000


##### release ###########################


Distributor ID:    Ubuntu
Description:    Ubuntu 17.04
Release:    17.04
Codename:    zesty


##### kernel ############################


Linux 4.10.0-35-generic #39-Ubuntu SMP Wed Sep 13 07:46:59 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux


Parameters: ro, quiet, libata.noacpi=1


##### desktop ###########################


GNOME


##### lspci #############################


00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
    DeviceName:  Onboard LAN
    Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:849c]


03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8812AE 802.11ac PCIe Wireless Network Adapter [10ec:8812] (rev 01)
    Subsystem: D-Link System Inc RTL8812AE 802.11ac PCIe Wireless Network Adapter [1186:3305]
    Kernel driver in use: rtl8821ae


##### lsusb #############################


Bus 002 Device 004: ID 045e:0766 Microsoft Corp. LifeCam VX-800
Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


##### PCMCIA card info ##################


##### rfkill ############################


3: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no


##### lsmod #############################


rtl8821ae            229376  0
btcoexist            167936  1 rtl8821ae
rtl_pci                32768  1 rtl8821ae
rtlwifi                98304  3 rtl_pci,btcoexist,rtl8821ae
mac80211              782336  3 rtl_pci,rtlwifi,rtl8821ae
cfg80211              602112  2 mac80211,rtlwifi
eeepc_wmi              16384  0
asus_wmi              28672  1 eeepc_wmi
sparse_keymap          16384  1 asus_wmi
mxm_wmi                16384  0
wmi                    16384  2 asus_wmi,mxm_wmi
video                  40960  1 asus_wmi


##### interfaces ########################


auto lo
iface lo inet loopback


##### ifconfig ##########################


eno1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20  memory 0xf6500000-f6520000 


lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1483  bytes 114672 (114.6 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1483  bytes 114672 (114.6 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.20  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::8819:49c5:2f5e:29aa  prefixlen 64  scopeid 0x20<link>
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 2783  bytes 1420676 (1.4 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1713  bytes 316118 (316.1 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


##### iwconfig ##########################


eno1      no wireless extensions.


lo        no wireless extensions.


wlp3s0    IEEE 802.11  ESSID:"Familia EA - 5G" 
          Mode:Managed  Frequency:5.26 GHz  Access Point: <MAC 'Familia EA - 5G' [AC1]> 
          Bit Rate=300 Mb/s  Tx-Power=20 dBm 
          Retry short limit:7  RTS thr=2347 B  Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-30 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:46  Missed beacon:0


##### route #############################


Kernel IP routing table
Destination    Gateway        Genmask        Flags Metric Ref    Use Iface
0.0.0.0        192.168.1.1    0.0.0.0        UG    600    0        0 wlp3s0
169.254.0.0    0.0.0.0        255.255.0.0    U    1000  0        0 wlp3s0
192.168.1.0    0.0.0.0        255.255.255.0  U    600    0        0 wlp3s0


##### resolv.conf #######################


nameserver 127.0.0.53


##### network managers ##################


Installed:


    NetworkManager


Running:


root      1093    1  0 00:55 ?        00:00:08 /usr/sbin/NetworkManager --no-daemon


##### NetworkManager info ###############


GENERAL.DEVICE:                        wlp3s0
GENERAL.TYPE:                          wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                        Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT:                        RTL8812AE 802.11ac PCIe Wireless Network Adapter
GENERAL.DRIVER:                        rtl8821ae
GENERAL.DRIVER-VERSION:                4.10.0-35-generic
GENERAL.FIRMWARE-VERSION:              N/A
GENERAL.HWADDR:                        <MAC address>
GENERAL.MTU:                            0
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                        0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/net/wlp3s0
GENERAL.IP-IFACE:                      wlp3s0
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    Familia EA - 5G
GENERAL.CON-UUID:                      4a50eead-15dc-4cec-93d3-80cf18119db8
GENERAL.CON-PATH:                      /org/freedesktop/NetworkManager/ActiveConnection/8
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                    300 Mb/s
CAPABILITIES.IS-SOFTWARE:              no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                  yes
WIFI-PROPERTIES.TKIP:                  yes
WIFI-PROPERTIES.CCMP:                  yes
WIFI-PROPERTIES.AP:                    yes
WIFI-PROPERTIES.ADHOC:                  yes
WIFI-PROPERTIES.2GHZ:                  yes
WIFI-PROPERTIES.5GHZ:                  yes
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{3,1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:  6b2d3be3-6632-48df-bbff-634097e92695 | Familia EA NS
CONNECTIONS.AVAILABLE-CONNECTIONS[2]:  4a50eead-15dc-4cec-93d3-80cf18119db8 | Familia EA - 5G
IP4.ADDRESS[1]:                        192.168.1.20/24
IP4.GATEWAY:                            192.168.1.1
IP4.ROUTE[1]:                          dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                            192.168.1.1
IP4.DOMAIN[1]:                          home.lan
DHCP4.OPTION[1]:                        requested_routers = 1
DHCP4.OPTION[2]:                        requested_domain_search = 1
DHCP4.OPTION[3]:                        wpad = 22:a:22
DHCP4.OPTION[4]:                        requested_time_offset = 1
DHCP4.OPTION[5]:                        requested_domain_name = 1
DHCP4.OPTION[6]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[7]:                        requested_broadcast_address = 1
DHCP4.OPTION[8]:                        host_name = FORCE
DHCP4.OPTION[9]:                        requested_wpad = 1
DHCP4.OPTION[10]:                      requested_netbios_scope = 1
DHCP4.OPTION[11]:                      next_server = 192.168.1.1
DHCP4.OPTION[12]:                      expiry = 1506920479
DHCP4.OPTION[13]:                      requested_interface_mtu = 1
DHCP4.OPTION[14]:                      requested_subnet_mask = 1
DHCP4.OPTION[15]:                      routers = 192.168.1.1
DHCP4.OPTION[16]:                      dhcp_message_type = 5
DHCP4.OPTION[17]:                      ip_address = 192.168.1.20
DHCP4.OPTION[18]:                      requested_static_routes = 1
DHCP4.OPTION[19]:                      domain_name = home.lan
DHCP4.OPTION[20]:                      requested_domain_name_servers = 1
DHCP4.OPTION[21]:                      broadcast_address = 192.168.1.255
DHCP4.OPTION[22]:                      requested_ntp_servers = 1
DHCP4.OPTION[23]:                      requested_netbios_name_servers = 1
DHCP4.OPTION[24]:                      dhcp_lease_time = 4294967295
DHCP4.OPTION[25]:                      domain_name_servers = 192.168.1.1
DHCP4.OPTION[26]:                      requested_ms_classless_static_routes = 1
DHCP4.OPTION[27]:                      subnet_mask = 255.255.255.0
DHCP4.OPTION[28]:                      network_number = 192.168.1.0
DHCP4.OPTION[29]:                      requested_host_name = 1
DHCP4.OPTION[30]:                      dhcp_server_identifier = 192.168.1.1
IP6.ADDRESS[1]:                        fe80::8819:49c5:2f5e:29aa/64
IP6.GATEWAY:                           


GENERAL.DEVICE:                        eno1
GENERAL.TYPE:                          ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                        Intel Corporation
GENERAL.PRODUCT:                        82579V Gigabit Network Connection (P8P67 Deluxe Motherboard)
GENERAL.DRIVER:                        e1000e
GENERAL.DRIVER-VERSION:                3.2.6-k
GENERAL.FIRMWARE-VERSION:              0.13-4
GENERAL.HWADDR:                        <MAC address>
GENERAL.MTU:                            1500
GENERAL.STATE:                          20 (unavailable)
GENERAL.REASON:                        2 (Device is now managed)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:19.0/net/eno1
GENERAL.IP-IFACE:                     
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    --
GENERAL.CON-UUID:                      --
GENERAL.CON-PATH:                      --
GENERAL.METERED:                        unknown
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                    unknown
CAPABILITIES.IS-SOFTWARE:              no
WIRED-PROPERTIES.CARRIER:              off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS:


SSID                    BSSID              MODE  CHAN  FREQ      RATE      SIGNAL  BARS  SECURITY  ACTIVE  *
Familia EA              <MAC 'Familia EA' [AC4]>  Infra  10    2457 MHz  54 Mbit/s  100    ▂▄▆█  WPA2      no       
Familia EA - Invitados  <MAC 'Familia EA - Invitados' [AC5]>  Infra  10    2457 MHz  54 Mbit/s  100    ▂▄▆█  WPA2      no       
Macaca                  <MAC 'Macaca' [AC3]>  Infra  7    2442 MHz  54 Mbit/s  90      ▂▄▆█  WPA2      no       
Familia EA - 5G        <MAC 'Familia EA - 5G' [AC1]>  Infra  52    5260 MHz  54 Mbit/s  87      ▂▄▆█  WPA2      yes    *
ARRIS-82F2              <MAC 'ARRIS-82F2' [AC2]>  Infra  1    2412 MHz  54 Mbit/s  64      ▂▄▆_  WPA2      no       
ARRIS-27D2              <MAC 'ARRIS-27D2' [AN6]>  Infra  1    2412 MHz  54 Mbit/s  54      ▂▄__  WPA2      no       
ARRIS-27D2-5G          <MAC 'ARRIS-27D2-5G' [AN7]>  Infra  40    5200 MHz  54 Mbit/s  50      ▂▄__  WPA2      no       


##### NetworkManager.state ##############


[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true


##### NetworkManager.conf ###############


[main]
plugins=ifupdown,keyfile


[ifupdown]
managed=false


##### NetworkManager profiles ###########


[[/etc/NetworkManager/system-connections/Familia EA - 5G]] (600 root)
[connection] id=Familia EA - 5G | type=wifi | permissions=
[wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Familia EA - 5G
[ipv4] method=auto
[ipv6] method=auto


[[/etc/NetworkManager/system-connections/Familia EA NS]] (600 root)
[connection] id=Familia EA NS | type=wifi | permissions=
[wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Familia EA NS
[ipv4] method=auto
[ipv6] method=auto


##### iw reg get ########################


Region: America/Santiago (based on set time zone)


global
country CL: DFS-JP
    (2402 - 2482 @ 40), (N/A, 20), (N/A)
    (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
    (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
    (5735 - 5835 @ 80), (N/A, 20), (N/A)


##### iwlist channels ###################


eno1      no frequency information.


lo        no frequency information.


wlp3s0    26 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 149 : 5.745 GHz
          Channel 153 : 5.765 GHz
          Channel 157 : 5.785 GHz
          Channel 161 : 5.805 GHz
          Channel 165 : 5.825 GHz
          Current Frequency:5.26 GHz (Channel 52)


##### iwlist scan #######################


eno1      Interface doesn't support scanning.


lo        Interface doesn't support scanning.


Channel occupancy:


      1  APs on  Frequency:2.412 GHz (Channel 1)
      1  APs on  Frequency:2.442 GHz (Channel 7)
      2  APs on  Frequency:2.457 GHz (Channel 10)
      1  APs on  Frequency:5.26 GHz (Channel 52)


wlp3s0    Scan completed :
          Cell 01 - Address: <MAC 'Familia EA - 5G' [AC1]>
                    Channel:52
                    Frequency:5.26 GHz (Channel 52)
                    Quality=70/70  Signal level=-33 dBm 
                    Encryption key:on
                    ESSID:"Familia EA - 5G"
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000002babb003b
                    Extra: Last beacon: 176ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: <MAC 'ARRIS-82F2' [AC2]>
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=48/70  Signal level=-62 dBm 
                    Encryption key:on
                    ESSID:"ARRIS-82F2"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000017c522d16b
                    Extra: Last beacon: 52ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
          Cell 03 - Address: <MAC 'Macaca' [AC3]>
                    Channel:7
                    Frequency:2.442 GHz (Channel 7)
                    Quality=62/70  Signal level=-48 dBm 
                    Encryption key:on
                    ESSID:"Macaca"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000001b999118e2
                    Extra: Last beacon: 52ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 04 - Address: <MAC 'Familia EA' [AC4]>
                    Channel:10
                    Frequency:2.457 GHz (Channel 10)
                    Quality=70/70  Signal level=-34 dBm 
                    Encryption key:on
                    ESSID:"Familia EA"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000002ba7f35bd
                    Extra: Last beacon: 52ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
          Cell 05 - Address: <MAC 'Familia EA - Invitados' [AC5]>
                    Channel:10
                    Frequency:2.457 GHz (Channel 10)
                    Quality=70/70  Signal level=-34 dBm 
                    Encryption key:on
                    ESSID:"Familia EA - Invitados"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000002ba7f3da3
                    Extra: Last beacon: 52ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK


##### module infos ######################


[rtl8821ae]
filename:      /lib/modules/4.10.0-35-generic/updates/dkms/rtl8821ae.ko
firmware:      rtlwifi/rtl8821aefw_29.bin
firmware:      rtlwifi/rtl8821aefw.bin
description:    Realtek 8821ae 802.11ac PCI wireless
license:        GPL
author:        Realtek WlanFAE    <wlanfae@realtek.com>
srcversion:    7E8496F0BB118AA70A0D506
depends:        rtlwifi,rtl_pci,btcoexist,mac80211
vermagic:      4.10.0-35-generic SMP mod_unload
parm:          swenc:Set to 1 for software crypto (default 0)
 (bool)
parm:          ips:Set to 0 to not use link power save (default 1)
 (bool)
parm:          swlps:Set to 1 to use SW control power save (default 0)
 (bool)
parm:          fwlps:Set to 1 to use FW control power save (default 1)
 (bool)
parm:          msi:Set to 1 to use MSI interrupts mode (default 1)
 (bool)
parm:          debug:Set debug level (0-5) (default 0) (int)
parm:          disable_watchdog:Set to 1 to disable the watchdog (default 0)
 (bool)
parm:          int_clear:Set to 0 to disable interrupt clear before set (default 1)
 (bool)


[rtl_pci]
filename:      /lib/modules/4.10.0-35-generic/updates/dkms/rtl_pci.ko
description:    PCI basic driver for rtlwifi
license:        GPL
author:        Larry Finger    <Larry.FInger@lwfinger.net>
author:        Realtek WlanFAE    <wlanfae@realtek.com>
author:        lizhaoming    <chaoming_li@realsil.com.cn>
srcversion:    44B60E4AEF8FE0C4508E8FE
depends:        mac80211,rtlwifi
vermagic:      4.10.0-35-generic SMP mod_unload


[rtlwifi]
filename:      /lib/modules/4.10.0-35-generic/updates/dkms/rtlwifi.ko
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:        Larry Finger    <Larry.FInger@lwfinger.net>
author:        Realtek WlanFAE    <wlanfae@realtek.com>
author:        lizhaoming    <chaoming_li@realsil.com.cn>
srcversion:    9BC255DBB57C8378BEB9E46
depends:        mac80211,cfg80211
vermagic:      4.10.0-35-generic SMP mod_unload


[mac80211]
filename:      /lib/modules/4.10.0-35-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:    309C9ACED540FCAA1DE7422
depends:        cfg80211
intree:        Y
vermagic:      4.10.0-35-generic SMP mod_unload
parm:          minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:          max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:          max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:          beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:          probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:          ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)


[cfg80211]
filename:      /lib/modules/4.10.0-35-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:        Johannes Berg
srcversion:    D77C8F93375950F3BA95B16
depends:       
intree:        Y
vermagic:      4.10.0-35-generic SMP mod_unload
parm:          bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:          ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:          cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)


##### module parameters #################


[rtl8821ae]
debug: 0
disable_watchdog: N
fwlps: N
int_clear: N
ips: N
msi: N
swenc: N
swlps: N


[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500


[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00


##### /etc/modules ######################


##### modprobe options ##################


[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci


[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac


[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off


[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode


[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211


[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en


[/etc/modprobe.d/rtl8821ae.conf]
options rtl8821ae ips=0
options rtl8821ae fwlps=0
options rtl8821ae msi=0
options rtl8821ae int_clear=0


##### rc.local ##########################


grep: /etc/rc.local: No such file or directory


##### pm-utils ##########################


##### udev rules ########################


##### dmesg #############################


[ 2603.244943] wlp3s0: aborting authentication with <MAC 'Familia EA - 5G' [AC1]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2616.963989] wlp3s0: authenticate with <MAC 'Familia EA - 5G' [AC1]>
[ 2616.965160] wlp3s0: send auth to <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 2616.966246] wlp3s0: authenticated
[ 2621.640697] wlp3s0: aborting authentication with <MAC 'Familia EA - 5G' [AC1]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2621.641740] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2621.793582] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 2621.996166] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2622.162362] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 2622.364869] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2624.219323] wlp3s0: authenticate with <MAC 'Familia EA - 5G' [AC1]>
[ 2624.220352] wlp3s0: send auth to <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 2624.221411] wlp3s0: authenticated
[ 2632.788315] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 2632.990758] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready (repeated 2 times)
[ 2635.078808] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 2635.281190] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2635.323195] wlp3s0: authenticate with <MAC 'Familia EA - 5G' [AC1]>
[ 2635.323892] wlp3s0: send auth to <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 2635.324904] wlp3s0: authenticated
[ 2635.325847] wlp3s0: associate with <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 2635.327099] wlp3s0: RX AssocResp from <MAC 'Familia EA - 5G' [AC1]> (capab=0x11 status=0 aid=1)
[ 2635.328700] wlp3s0: associated
[ 2635.328736] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 3482.054045] wlp3s0: deauthenticating from <MAC 'Familia EA - 5G' [AC1]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3482.436541] rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin
[ 3482.436543] rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin
[ 3482.436554] rtl8821ae 0000:03:00.0: Direct firmware load for rtlwifi/rtl8812aefw.bin failed with error -2
[ 3482.436555] rtlwifi: Selected firmware is not available
[ 3482.436727] rtl8821ae 0000:03:00.0: Direct firmware load for rtlwifi/rtl8812aefw_wowlan.bin failed with error -2
[ 3482.436727] rtlwifi: Selected firmware is not available
[ 3482.437327] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 3482.439318] rtlwifi: rtlwifi: wireless switch is on
[ 3482.439856] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 3482.463796] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3482.514545] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3482.717080] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3482.768469] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3482.970924] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready (repeated 2 times)
[ 3485.032930] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3485.235419] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3485.291933] wlp3s0: authenticate with <MAC 'Familia EA - 5G' [AC1]>
[ 3485.292691] wlp3s0: send auth to <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 3485.294213] wlp3s0: authenticated
[ 3485.301701] wlp3s0: associate with <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 3485.302986] wlp3s0: RX AssocResp from <MAC 'Familia EA - 5G' [AC1]> (capab=0x11 status=0 aid=1)
[ 3485.304620] wlp3s0: associated
[ 3485.304647] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 3575.669348] wlp3s0: deauthenticating from <MAC 'Familia EA - 5G' [AC1]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3576.074218] rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin
[ 3576.074221] rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin
[ 3576.074234] rtl8821ae 0000:03:00.0: Direct firmware load for rtlwifi/rtl8812aefw.bin failed with error -2
[ 3576.074236] rtlwifi: Selected firmware is not available
[ 3576.074412] rtl8821ae 0000:03:00.0: Direct firmware load for rtlwifi/rtl8812aefw_wowlan.bin failed with error -2
[ 3576.074413] rtlwifi: Selected firmware is not available
[ 3576.075170] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 3576.077135] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 3576.077441] rtlwifi: rtlwifi: wireless switch is on
[ 3576.107400] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3576.158280] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3576.360764] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3576.412162] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3576.614673] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready (repeated 2 times)
[ 3578.681586] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3578.883989] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3578.925982] wlp3s0: authenticate with <MAC 'Familia EA - 5G' [AC1]>
[ 3578.926736] wlp3s0: send auth to <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 3578.928214] wlp3s0: authenticated
[ 3578.929071] wlp3s0: associate with <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 3578.930342] wlp3s0: RX AssocResp from <MAC 'Familia EA - 5G' [AC1]> (capab=0x11 status=0 aid=1)
[ 3578.931930] wlp3s0: associated
[ 3578.931960] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 3958.073841] wlp3s0: deauthenticating from <MAC 'Familia EA - 5G' [AC1]> by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3958.474022] rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin
[ 3958.474025] rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin
[ 3958.474039] rtl8821ae 0000:03:00.0: Direct firmware load for rtlwifi/rtl8812aefw.bin failed with error -2
[ 3958.474040] rtlwifi: Selected firmware is not available
[ 3958.474216] rtl8821ae 0000:03:00.0: Direct firmware load for rtlwifi/rtl8812aefw_wowlan.bin failed with error -2
[ 3958.474217] rtlwifi: Selected firmware is not available
[ 3958.476133] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 3958.476430] rtlwifi: rtlwifi: wireless switch is on
[ 3958.481729] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 3958.503262] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3958.554058] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3958.756536] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3958.808971] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3959.011405] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready (repeated 2 times)
[ 3961.074950] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00000706 .
[ 3961.277303] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3961.331867] wlp3s0: authenticate with <MAC 'Familia EA - 5G' [AC1]>
[ 3961.332620] wlp3s0: send auth to <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 3961.334433] wlp3s0: authenticated
[ 3961.337515] wlp3s0: associate with <MAC 'Familia EA - 5G' [AC1]> (try 1/3)
[ 3961.340790] wlp3s0: RX AssocResp from <MAC 'Familia EA - 5G' [AC1]> (capab=0x11 status=0 aid=1)
[ 3961.342416] wlp3s0: associated
[ 3961.342448] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready


########## wireless info END ############
wireless-info.tar.gz

Regard,
Michael
Attached Files
↧
Search

[xubuntu] some websites not accessible

October 2, 2017, 4:31 am
$
0
0
Hello

Since yesterday (maybe longer) I can 't access the website www.raspberrypi.org anymore. Other websites are no problem. I can access the site on my phone though. Only on my tree xubuntu 17.04 devices, I get the error message:

www.raspberrypi.org’s server DNS address could not be found.
DNS_PROBE_FINISHED_NXDOMAIN

It 's not accessible in firefox nor in chromium. I also can 't ping the site.

Could someone please give me a hint on this. I've been searching the net and tried some things but nothing helped. Thanks a lot!

fagus
↧

[ubuntu] problem in Link detected via ethtool

October 2, 2017, 4:56 am
$
0
0
Hello guys

I have a problem ,that I have never saw it before .

I use Ubuntu 14.0.4 and kernel 4.4 , when I run ethtool "interfacename" always return link Detecrted : yes , even I detach cable it return link Detecrted : yes

I dont find out , why ?
thank you for your consideration
↧
↧

[ubuntu] Selcting BAD Gateways - ICMP Redirect

October 2, 2017, 7:56 am
$
0
0
Hi All,
I have a Server with " Ubuntu 12.04.5 LTS " and it's connected as follows.


Server -----> SWITCH -------> R1
| |------> R2
|---------> R3

Switch and Router interfaces are in the same subnet ( 192.168.0.0/24 ). Server Gateway set R1 ( 192.168.0.1 ).

Issue :-
* For some destinations it tries to take other gateways ( like R2 & R3 )

Things Done :-
* Created a specific route towards the destination. It works for nearly one hour and normalized back to take other IPs as gateways.
* Restart the NEtwork interface , same as above work for hour or two.

Findings :-
By doing few digging I found out that this happened due to " ICMP Redirect ". So I edited the sysctl file and disabled ICMP redirects.

But Still am getting this issue. Appreciate If some one can guide me regarding this .....
↧

LACP on ubuntu 17 not working

October 2, 2017, 10:35 am
$
0
0
Hello, I've been having issues trying to set up LACP on my ubuntu 17 machine. I've added the bonding to the modules file as well done modprobe bonding. Below is my current interface file set up.

#nic 1
auto enp5s0f0
iface enp5s0f0 inet manual

#nic 2
auto enp5s0f1
iface enp5s0f1 inet manual

#bond
auto bond0
iface bond0 inet static
address x.x.x.x
netmask x.x.x.x
gateway x.x.x.x
slaves enp5s0f0 enp5s0f1

Ive tried to comment out the nic lines like some tutorials show with no luck. When I do an ifcong, it does show bond0 being there with no IP address. I have a Norte switch that has already been configured for LACP as I am switching from free NAS to a custom set up using ubuntu. Any help would be greatly appreciated as I've tried multiple tutorials with each one being different and no luck.

nrian
↧

Xubuntu LTS 16.04 - Internet stopped working

October 3, 2017, 1:35 am
$
0
0
I have a PPPOE connection, through router. I tried wireless and with cable also, but it doesn't work. This happened all of a sudden. It is exactly like it is disabled from somewhere, it doesn't show any available networks. I ran some commands through terminal, I will post here the outcomes, maybe it will help.

ifconfig

enp0s25 Link encap:Ethernet HWaddr b0:5a:da:b4:d0:2e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B ) TX bytes:0 (0.0 B )
Interrupt:20 Memory:d0700000-d0720000

lo

inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2308 errors:0 dropped:0 overruns:0 frame:0
TX packets:2308 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:185728 (185.7 KB) TX bytes:185728 (185.7 KB)

lspci -k

00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
Subsystem: Hewlett-Packard Company Ethernet Connection I217-V
Kernel driver in use: e1000e
Kernel modules: e1000e
02:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n
DeviceName: WLAN
Subsystem: Broadcom Corporation BCM43228 802.11a/b/g/n
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma

ping 192.168.0.1
connect: Network is unreachable

ping www.google.ro
ping: unknown host www.google.ro


iwconfig
lo no wireless extensions.
enp0s25 no wireless extensions.
sudo lshw -C network
*-network
description: Ethernet interface
product: Ethernet Connection I217-V
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: enp0s25
version: 04
serial: b0:5a:da:b4:d0:2e
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=0.12-3 latency=0 link=no multicast=yes port=twisted pair
resources: irq:29 memory:d0700000-d071ffff memory:d073f000-d073ffff ioport:3080(size=32)
*-network
description: Network controller
product: BCM43228 802.11a/b/g/n
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=bcma-pci-bridge latency=0
resources: irq:18 memory:d0500000-d0503fff

My laptop's config is:
Intel i5 4210M
8 GB RAM
SSD INTEL 2500 series
Nvidia HD4600
↧
Viewing all 23300 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>